WA3002G4 Bridge Mode with Wifi

Govind Kailas

Govind Kailas

Newbie
Messages
3
Location
NA
Hi All,I have a WA3002G4 modem connected in bridge mode and I wanted to setup the wifi. Wifi works fine in PPPOE mode but fails to connect in bridge mode. I must use bridge mode as I have some specific VPN network.How can I setup a wifi connection in bridge mode ? I was told to use Mac Filtering and wireless bridge for this purpose.But I am not sure how to use this.
 
Check in WAN page whether a different line is used for VPN?
usually line 0_35 for normal Internet connection. PPPoE mode.

For VPN it could be line 0_33 which can be in "Bridged " mode.
You have to log in with your VPN credentials.

Or give details how you connect to VPN now ?
In Network settings VPN connection is set separately.

Confirm "Port Mapping " menu item available in your model WA3002_g4.
https://broadband.forum/bsnl-broadband/50052-bsnl-broadband-utstar-wa3002-g4/
H53/P9706
 
I have only one in my wan page which is 0_35 and I dont have a separate network settings for VPN.
I have my office provided software to connect to vpn which will work only in Bridge mode.
What shld I do in this case ?

Check in WAN page whether a different line is used for VPN?
usually line 0_35 for normal Internet connection. PPPoE mode.

For VPN it could be line 0_33 which can be in "Bridged " mode.
You have to log in with your VPN credentials.

Or give details how you connect to VPN now ?
In Network settings VPN connection is set separately.

Confirm "Port Mapping " menu item available in your model WA3002_g4.
https://broadband.forum/bsnl-broadband/50052-bsnl-broadband-utstar-wa3002-g4/
H53/P9706
 
In bridge mode , do you have to connect to BSNL first and then do you type VPN ID and PW in a Dialer? to connect to your office VPN network.( or you open a website and log in ?)In PPPoE mode , if you use the dialer for VPN log in what happens ?Check the Device Info and give the software version details.
 
Yes exactly, I connect to BSNL first and then use the VPN dialer.
From the pppoe mode it was just refusing to connect, but I know that vpn works fine in Airtel network with pppoe(my colleagues are using Airtel).

Will post the device info later today.


In bridge mode , do you have to connect to BSNL first and then
do you type VPN ID and PW in a Dialer? to connect to your office VPN network.
( or you open a website and log in ?)


In PPPoE mode , if you use the dialer for VPN log in what happens ?

Check the Device Info and give the software version details.
 
Probably Your friends using Airtel will have same modem/router.Beetel 450BXI . ( same as wa3002_g4) compare settings.
 

Top