Unable to Access My Modem admin page (BSNL FTTH)

[AshikAliLive]

I have a BSNL FTTH (Mysore Division), my bsnl modem (Huawei hg850a) is configured in bridge mode and I use my Mi RP3 Pro router for authentication. But now, I'm unable to access my modem login page, I tried with Wifi & Lan cable nothing seems working.

I tried a whole lot of IP ranges, nothing worked. Please help.

 

[varkey]

In bridge mode if you need to access the modem management UI, then you need to create a separate interface on your router and assign an IP address in the same subnet as that of the modem management interface. This would create the required routes and provide a path to reach the management UI.

I don't know if your main router supports this. I use an OpenWRT device and I've created a separate interface for this and I can access the management UI without issues.

 

[varkey]

More details here -- How do I access my modem's GUI when it's in bridged mode?

 

[AshikAliLive]

@varkey Bro...I've installed OpenWRT on my router. Can you please tell how to create a interface?

 

[varkey]

Access PPPoE modem webinterface from OpenWRT

To get rid of my provider’s unreliable VDSL router, I recently bought a ZyXEL VMG1312-B30A VDSL gateway.This device can be configured in router and bridge mode. To let my OpenWRT router establishan internet connection I chose bridge mode. This mode prevents problems with double NAT and port...

ressourcenkonflikt.de

Accessing your modem from OpenWRT Router

Updated version can be found at ciphermenial.github.io

simplebeian.wordpress.com

 

[AshikAliLive]

@varkey Bro tried all of them.. it is redirected the OpenWRT GUI not the modem.

 

---

[varkey]

If you share screenshots might be able to help.

The IP address of the ONT interface should be in the same subnet as that of your ONT. So if your ONT's IP address is 192.168.1.1 then you could assign 192.168.1.2 / 255.255.255.0 to this new interface. And to access it you need to access 192.168.1.1

Also, it should be on a different subnet from your OpenWRT device ie ONT and OpenWRT device shouldn't be using 192.168.1.1

 

[AshikAliLive]

My router running OpenWRT -LuCi running in 192.168.1.1

Created a new interface named "modem"..with the following details.

 

[varkey]

That obviously wouldn't work, please check my previous comment. What is the IP address of the ONT?

 

[aakshey]

If the ONT subnet is 192.168.1.1, give a static IP of 192.168.1.x to your device. Connect via LAN. Then open the interface page, perhaps 192.168.1.1

 

[chandranap]

when the modem is in bridge you need to follow the steps below

set a static ip in your computer eg 192.168.1.101
then set gateway as 192.168.1.1

after this you can get the modem GUI in 192.168.1.1