i was not able to find where to change the setting of the fields security, eap method, phase 2 you auth. Could you please assist me in configuring it? This problem is bothering us for a long time.
sorry for late post
my system crashed badly.
The process is not that elaborate though!
just plug the LAN cable coming from the roof top antenna into the WAN port of
router. Then on router config. page set it to DHCP & manually set the
DNS values used by Tikona (as router config. doesnt have the option of automatic DNS) so in your case you can select "Obtain DNS Automatically" (if you have that option) You can also enable
MAC ID clone (it will clone your
laptop MAC id to the router) Then save your settings.
Then connect your laptop to your router through LAN cable or WiFi & then go to
http://1.254.254.254 on your browser & login with your Tikona ID. do not switch off router after that.
Let me know if this helped! Also its better we do this troubleshooting on this forum itself so that other members can use these information!
P.S. to open router config goto 192.168.1.1 in internet explorer after u have pluged everything
P.S.2 forget about my last post it was for thoes who wanted to connect their wifi devices like laptop or i phone etc
directly to tikona network (without a router)