Tata Sky Broadband: Static IPV6 - Unable to Configure

No help from there yet either. So for some reason my WAN is not fetching an IPv6 address for itself.
 
Whoever got this to work, are you using SLAAC or DHCP6 in WAP for IPv6?
 
@rizexor That would be correct. IPv4 is NAT-ed. The only public IP you get is IPv6.
 

@rizexor Yeap, this is going to become the norm now, that IPv4 access will be behind CG-NAT, while the IPv6 addresses will be publicly routable for remote access.
 
I also applied for static IPv6 and as per customer care it is activated. But I am not able to get IPv6, anyone configured IPv6 in Pfsense?
 
@nerdseeder You have to get the back end engineer to login to your modem and do some changes. I applied 3 times to get it done and sent them screenshots that it wasn't activated yet.
 
@ravenous24 Do you know how they are configuring IPv6?
I tried every option in below snapshot. Nothing worked for me till now.

Screenshot 2020-10-11 at 8.00.24 PM.webp
 
@ravenous24 I am using Dumb bridge ONT Nokia G-010G-Q as seems like G-140W-F does not support bridge mode. I am using Pfsense.

Can you please share screenshot from your IPv6 configuration from ONT. You can hide IPs and other personal details.
 

Top