Smartax Mt841 And Dataone Downloads

Surej

Newbie
[OP]
Aug 2, 2006
7
0
Hi, I have one SMARTAX MT841 and Dataone UL900 plan , I use the login through the modem , the problem is i get data transfer for 3- 4 min @ 25K - 30K and it falls to 0 , after 3-4 min it again starts . Modem never disconnects..sometimes i need to restart the modem again to start the data transfer. I have done the firmware upgrade i got from this forum..is there any new firmwares available..? ThanksSurej
 

seshu

Listener
Regulars
Mar 31, 2006
1,254
7
@Surej , you should have given the firmware version number ...if modem never disconnects , does the data transfer resume by itself after a short duration ?
 

Surej

Newbie
[OP]
Aug 2, 2006
7
0
QUOTE(seshu @ Aug 23 2006, 11:11 AM) [snapback]59578[/snapback]
@Surej , you should have given the firmware version number ...

if modem never disconnects , does the data transfer resume by
itself after a short duration ?
[/b]


Firmware ver is MT841_V100R001C01B021SP03_20051223

It resumes data transfer by itself sometimes..I dont remember the old firmware ver.i doubt if it's due to the firmware upgrade ..

Thanks

Surej
 


seshu

Listener
Regulars
Mar 31, 2006
1,254
7
I understand that your problem is not due to "... 20051223 "firmware upgrade . (And donot go for a new upgrade which is in beta version .)Did you check for any changes in your network configuration ? sometimes the entries become corrupt ...And how are you connected ? thru LAN/USB ? LAN is better .Did you request BSNL to check the phone cable ? there can bea Leak/earthing problem .And problem at the Exchange is not ruled out .
 

Surej

Newbie
[OP]
Aug 2, 2006
7
0
I never changed any DNS or gateway IP's...only thing i did was changed modem firmware and made it autologinSurej
 

seshu

Listener
Regulars
Mar 31, 2006
1,254
7
the network entries may become corrupt on their own !so pls check them once ... Assuming that you are usingwin XP & modem is connected thru LAN ; if your networkconfiguration is okay then either there is a earthing/Leakproblem in your phone cable or the problem may not beat your end . I'd suggest to call BSNL to check your Line .And if required give a written complaint at the Exchange .I am sure that your problem is not due to firmware upgrade .And if you require a previous firmware , I'll try to give a Linkfor it .
 


Surej

Newbie
[OP]
Aug 2, 2006
7
0
Hi, can you please give me the right settings for my modem so i can reconfigure it and if possible give me the link for the previous ver of firmware...i use auto login settings for my modem so if possible give me that complete settings..ThanksSurej
 

seshu

Listener
Regulars
Mar 31, 2006
1,254
7
check for the following in your TCP/IP settings :( Local Area Connection -->Properties -->Internet Protocol(TCP/IP) -->Properties )Use following IP address :IP address 192.168.1.xxx {xxx = 2 to 255 any value}subnet mask 255.255.255.0Default gatway 192.168.1.1Preferred DNS 61.1.96.69 andAlternate DNS 61.1.96.71
 

Surej

Newbie
[OP]
Aug 2, 2006
7
0
I have changed the settings but still i have the problem data flow is not regular ..possible to get the previous firmware..? or any other new ver..?ThanksSurej
 

seshu

Listener
Regulars
Mar 31, 2006
1,254
7
I'd suggest to give a written complaint to BSNL for
your download problem .

and as I said earlier , new version is in beta stage &
found that it is not stable . And your current firmware
is a reliable one . However I try to find the previous
version and inform you if I find it .

However , you may contact Huawei India for the firmware .
see : http://www.huawei.com/ap/en/about/info.do?cid=64&id=101
 

Similar threads