Settings for manual login

  • Thread starter Thread starter hana12
  • Start date Start date
  • Replies Replies 5
  • Views Views 3,214
H

hana12

Newbie
Messages
1
Location
NA
ISP
234.556.88.9
I am using airtel256 220bx modem unlimited plan. Earlier i used to enter my user/password to login but my friend changed it to the 'always login' state.Now whenever i attach my pc or laptop to the LAN card it automatically gets connected.Anybody knows how to reverse those settings so that i have to manually login.I will be grateful.🙂
 
Go to
IE-->|Tools--> Inernet settings--> conections
Choose Never Dial a Connection
 
er.. no.. i think you have to change your modem config profile (from the DSL modem config WAN page) to dial mode, instead of ethernet mode. don't know the exact settings you need to change. Best you call your friend, or as a last resort cc to help you out...
 
@hana12
Welcome to broadbandforum.co
for dialer reference:
PPPoE DIALER INSTALLATION
"Bridged " Dialup beetel 220Bx

1. Open IE type in address bar 192.168.1.1
2. Id admin Password : password
3. Select WAN
4 .Select edit
NEXT
5.Select bridged
encapsulation : llc/snap
6. NEXT
7. ENTER ID 02742345678_xx@airtelbroadband.in ( *example )
...............password xxxxxxxx
authentication AUTO
8.NEXT
9. Enable WAN service
10. SAVE
11 SAVE/REBOOT
12. WAIT FOR 2 TO 3 MINUTES MINUTES
13. SURF
WATCH IN STATUS BAR modem disconnection /reconnection etc.

Presume you know how to use a dialer for broadband.

For modem details manual etc

Welcome to Beetel Modems
 
Sorry if I was wrong . I use Microsoft Virtual Adaper for PPPoe dialing and use Huawaei router(BSNL one) in bridge mode.I also once accidentally clicked "always use this connection" and it used to auto dial itself. That's why........ Dont know much about your dialers.........
 
Go to
IE-->|Tools--> Inernet settings--> conections
Choose Never Dial a Connection
@Hana2
It is OK. Just to prevent Dial up connection (56KB) ( if any)coming up automatically.
if a dial up connection with Telephone number was programmed earlier.
Para Two
To set up an internet connection click "SETUP" at top of the menu.
and follow the procedure.
 

Top