arshad.moin
Newbie
I have tried to login in WiMax Antena by setting ip 192.168.1.22 and then telnet 192.168.1.1 it works....
admin/admin or root/telsimawl works...
My question is i have a wimax connection and want to use the connection from 2 places i have wimax hardware setup and reliance guys..gave me a static IP connection
speed is 1mbps do i need..to do any additional configuration for setting up...
also i need.... to know any other usefull commands from antena login... other then sh bs
chk the output of my signal strength... email me.. [email protected]
elsima_ss#sh bs
================================================================================
==========================================
| DOW
NLINK | UPLINK |
|-----------
------------|----------------------|
IDX BS-NAME SECTOR-ID FREQUENCY BAND STATE |FEC
RSSI CINR |FEC RSSI CINR | PTx
================================================================================
==========================================
1 Freq10 00:00:00:31:30:01 3362000 3000 OPER |qam64-3/4
-45 25 |qam64-3/4 -73 26 |-1.25
2 Freq9 00:00:00:00:00:00 3359000 3000 -NC- |-NA-
-110 0 |-NA- -110 0 | 0.00
3 bs3 00:00:00:00:00:00 3340000 3000 -NC- |-NA-
-110 0 |-NA- -110 0 | 0.00
4 bs4 00:00:00:00:00:00 3390000 3000 -NC- |-NA-
-110 0 |-NA- -110 0 | 0.00
5 Freq8 00:00:00:00:00:00 3312000 3000 -NC- |-NA-
-110 0 |-NA- -110 0 | 0.00
6 Freq7 00:00:00:00:00:00 3309000 3000 -NC- |-NA-
-110 0 |-NA- -110 0 | 0.00
7 bs1 00:00:00:00:00:00 3337000 3000 -NC- |-NA-
-110 0 |-NA- -110 0 | 0.00
8 bs2 00:00:00:00:00:00 3387000 3000 -NC- |-NA-
-110 0 |-NA- -110 0 | 0.00
================================================================================
==========================================
Thanks,
Arshad.
admin/admin or root/telsimawl works...
My question is i have a wimax connection and want to use the connection from 2 places i have wimax hardware setup and reliance guys..gave me a static IP connection
speed is 1mbps do i need..to do any additional configuration for setting up...
also i need.... to know any other usefull commands from antena login... other then sh bs
chk the output of my signal strength... email me.. [email protected]
elsima_ss#sh bs
================================================================================
==========================================
| DOW
NLINK | UPLINK |
|-----------
------------|----------------------|
IDX BS-NAME SECTOR-ID FREQUENCY BAND STATE |FEC
RSSI CINR |FEC RSSI CINR | PTx
================================================================================
==========================================
1 Freq10 00:00:00:31:30:01 3362000 3000 OPER |qam64-3/4
-45 25 |qam64-3/4 -73 26 |-1.25
2 Freq9 00:00:00:00:00:00 3359000 3000 -NC- |-NA-
-110 0 |-NA- -110 0 | 0.00
3 bs3 00:00:00:00:00:00 3340000 3000 -NC- |-NA-
-110 0 |-NA- -110 0 | 0.00
4 bs4 00:00:00:00:00:00 3390000 3000 -NC- |-NA-
-110 0 |-NA- -110 0 | 0.00
5 Freq8 00:00:00:00:00:00 3312000 3000 -NC- |-NA-
-110 0 |-NA- -110 0 | 0.00
6 Freq7 00:00:00:00:00:00 3309000 3000 -NC- |-NA-
-110 0 |-NA- -110 0 | 0.00
7 bs1 00:00:00:00:00:00 3337000 3000 -NC- |-NA-
-110 0 |-NA- -110 0 | 0.00
8 bs2 00:00:00:00:00:00 3387000 3000 -NC- |-NA-
-110 0 |-NA- -110 0 | 0.00
================================================================================
==========================================
Thanks,
Arshad.