Problem In Autodial

[might_it_guy]

iam facing the net disconnectivity problem.the net is disconnecting very oftenly and again connecting.this problem is occured after i made autodial of my SMARTAX MT841.after that very oftenly,the "act signal light is off or stay without on-off" for sometime.the color of LINK display light is changed to orange after AUTODIAL.i getting d/w rate is low.can anyone suggest how i solve this problem.

 

[seshu]

^ change modem's configuration to Bridged modeand check the stability of connection . Use a dialerto connect . if the connection is okay in Bridged modethen you can find out the reason(s) for the problem .

 

[might_it_guy]

QUOTE(seshu @ Oct 13 2006, 05:05 PM) [snapback]65188[/snapback]
^ change modem's configuration to Bridged mode
and check the stability of connection . Use a dialer
to connect . if the connection is okay in Bridged mode
then you can find out the reason(s) for the problem .
[/b]

Mr.seshu i try for that one what u said,but i din't succed,i don't know how to do.can suggest me the procedure,please 🙁

 

[seshu]

^ Assuming that you know your user name & password ;

power on your modem

take a safety pin & push it into reset hole of modem to
press a switch inside for about 10 sec . this will reset
modem to Bridged mode .

if you are using win XP , make a new internet connection
dialer . enter your user name & password to connect .

for other windows system , use RASPPPOE dialer sw
(www.raspppoe.com) to connect to the net .

check the stability of the connection & report back .

 

[might_it_guy]

QUOTE(seshu @ Oct 13 2006, 10:08 PM) [snapback]65243[/snapback]
^ Assuming that you know your user name & password ;

power on your modem

take a safety pin & push it into reset hole of modem to
press a switch inside for about 10 sec . this will reset
modem to Bridged mode .

if you are using win XP , make a new internet connection
dialer . enter your user name & password to connect .

for other windows system , use RASPPPOE dialer sw
(www.rasppoe.com) to connect to the net .

check the stability of the connection & report back .
[/b]


It's working,Than God. :lol:
Thank u very very much Mr.Seshu

 

[might_it_guy]

Mr.Sehu,the problem is clear,but see the picture below

http://img149.imageshack.us/my.php?image=bsnlwz8.jpg

I can't understand how this happened,can u pls help me.

 

---

[seshu]

^ I didnt get it , could you tell what has happened ...you are working with windows XP - right ? generallyhow many connections are shown at system tray ?

 

[might_it_guy]

Iam using Windows XP,when i connected to net via usb,there are two icons in network connections(one is my lan card network icon,the other one is my net icon[dialup icon]).after i connected to net via lan.there must one icon(lan is connected).i changed to autodial previously u knw abt that.i solved using reset the modem.after that i connected via usb.so,obvisouly,there must be two icons in network connections.but i saw three[one for dialup icon,the system lan icon and the another lan icon which specifying that u'r connected.
u can see that another LAN CONNECTION[Local Area Connection 2] is showinh in the taskbar as well as in network connections.

http://imageshack.us

 

[seshu]

^ I hope someone with windows XP will be able to
respond to the above confusion ... I'm trying to
findout what is wrong from your image & its details ...

 

[pushkar]

Its perfectly allright. When you connect via USB while not using autodial, then two connections appear in tray icon besides your LAN connection. There is no problem.