Not Happy with Broadband connection

Nikunj93

Newbie
Messages
94
Location
NA
ISP
BSNL
Okay guys, recently I posted a thread about very frequent disconnection in my BB, but now it's okay, I changed to G.DMT and BSNL guys cleared the noise in the phone line too. Now, the net is slow. It's not bb like. Pages do not open instantly. Basically I feel it's the ping.
Here are some stats of my connection:
DSL Status

Status SHOWTIME
ModeG.DMT
TypeInterleave
DownstreamUpstream
Rate (Kbps)6922 830
SNR Margin (dB)28.1 19.0
Attenuation (dB)12.0 6.5
Attainable Rate (Kbps):13429 1479
Output Power (dBm)12.3 13.7
Super Frames49677 49676
Super Frame Errors41 80

http://www.pingtest.net

https://www.speedtest.net

The stats do not look bad, they are not very bad tbh, but it's not optimally working. What steps can be taken?

Thank you!
 
D

Deleted member 10390

Change DNS. Try Open DNS or Google DNS.
 

Nikunj93

Newbie
Messages
94
Location
NA
ISP
BSNL
yes, but that is invalid since i have a 512 kbit line and that trade-off of speed begins at speeds above 8 mbit. Please be well informed before spreading wrong information. Thanks though.
 

x720

Incoherent Poster
Messages
10,414
Location
Gurgaon | Mumbai
ISP
airtel, BSNL, MTNL
I think you attenuation is a little high, here compare your values with mine :-
 


Piyush Chandra

Curious!
Messages
197
Location
NA
ISP
BSNL-DSL
hey dude x720 how can u get such a low attenuation rates. mine is 30.5db (down)that means i have far too much noise in my line than urs.what kinda wire are you using....cooper ok... what thickness 9mm or more. i think the copper wire hez on is of ver high quality. but still.....any copper wire cant give a that much low rates. AMAZED ;) and also do ur house have underground telephone wiring which is common now a days and also the lenght of copper wire used from DP (pole) to the (internal house wiring) or modem is very less?????wt kinda wire is that....;)
 

x720

Incoherent Poster
Messages
10,414
Location
Gurgaon | Mumbai
ISP
airtel, BSNL, MTNL
Umm, my setup is as follows :The exchange is in the basement of my building. The wiring upto the exchange is optical fibre, then from the exchange to my apartment's pair box (14 floors up) the wiring is copper. Internal wiring is about 2- 3 years old and is again made of copper. I have no idea about the thickness. I guess its due to the lack of joints in the wire (no dp pole and stuff) that I have low attenuation values. All wiring including the ofc is underground.
 
Messages
670
Location
NA
ISP
...
unless you live in the exchange itself, you cant get anywhere near those values on copper @piyush :D
 

Piyush Chandra

Curious!
Messages
197
Location
NA
ISP
BSNL-DSL
@aatuifyes frnd...i understand that. dats y was enquiring to him about dis like a FBI Agent. ;).and mind it - the exchange lives in his building. not him ;). lucky guy.!