I have a WISP Connection which has allocated me IP "172.150.0.123"
his Default gateway is "172.150.0.1"
When I set my Network Interface (WIFI/LAN) I need to access his login page at 1.254.254.254 and login manually.
Uptil now I was able to access internet by using the Inbuilt WI-FI Card on laptop but now he has lots of bird nest in his
tower, which are visible and signal strenght has gone down but he will NOT FIX it, so I grabbed a Access Point from him
(Currently under testing) as its no where near TP-Link 5210 and other model.
So as I Already Have a TP-link MR3420, Running DD-WRT, I was able to set it up simply by inserting The LAN Cable coming from
this access point to WAN port in MR3420, however this had issues as it connecting only my laptop (cause IP is x.x.x.123) thru this
connection.
This access point doesn't has its own IP, whatever IP I assign to network adapter is getting detected at WISP login page, if its my allocated IP it connects, if I change the network adapter IP, I get IP mis-match error and unable to login.
If i try to access Internet thru TP-Link Router SSID, I am getting a new IP allocated and Login page comes up and rejects me
cause its not matching IP "172.150.0.123"
I was following a couple of setups and now I am not able to connect this WISP Access Point to this router, Its not even
giving me the login page which used to work till now.
Does anyone here has tips on how to make use of my existing router and able to connect all devices.
Eg: I want router to be appear as IP "172.150.0.123" and once internet is connected all other devices are able to access internet.
It may be a easy step, but I am not a network guy so have limited knowledge about it,
please let me know if there's a easy way to setup this thing.
his Default gateway is "172.150.0.1"
When I set my Network Interface (WIFI/LAN) I need to access his login page at 1.254.254.254 and login manually.
Uptil now I was able to access internet by using the Inbuilt WI-FI Card on laptop but now he has lots of bird nest in his
tower, which are visible and signal strenght has gone down but he will NOT FIX it, so I grabbed a Access Point from him
(Currently under testing) as its no where near TP-Link 5210 and other model.
So as I Already Have a TP-link MR3420, Running DD-WRT, I was able to set it up simply by inserting The LAN Cable coming from
this access point to WAN port in MR3420, however this had issues as it connecting only my laptop (cause IP is x.x.x.123) thru this
connection.
This access point doesn't has its own IP, whatever IP I assign to network adapter is getting detected at WISP login page, if its my allocated IP it connects, if I change the network adapter IP, I get IP mis-match error and unable to login.
If i try to access Internet thru TP-Link Router SSID, I am getting a new IP allocated and Login page comes up and rejects me
cause its not matching IP "172.150.0.123"
I was following a couple of setups and now I am not able to connect this WISP Access Point to this router, Its not even
giving me the login page which used to work till now.
Does anyone here has tips on how to make use of my existing router and able to connect all devices.
Eg: I want router to be appear as IP "172.150.0.123" and once internet is connected all other devices are able to access internet.
It may be a easy step, but I am not a network guy so have limited knowledge about it,
please let me know if there's a easy way to setup this thing.