Need help for Lan

  • Thread starter hbkwarez
  • Start date
  • Replies: Replies 2
  • Views: Views 1,522


Originally posted by [email protected] 27 2005, 05:49 PM
Hi Guys,

Refer to the 1st post in this topic. I have finally tried the solution on my DSL 502T and it WORKS !!

The only additional thing which u need to do in addition to the things already mentioned in the 1st post is to disable DHCP from Home>>DHCP in the modem settings page, scroll down click apply then save and reboot. Now assign a static IP to ur lan card...use ; put the mask in as  and Gateway as ; use the foll DNS - Primary ; secondary

Goto Network connections in Ctrl panel >> Create a new connection >> connect to the internet >> setup my connection manually >> connect using broadband connection that requires username & password >> Put in the ISP name ie MTNL >> put  in ur username and password >> add a shrtcut (will make it easy to find after setting up the connex.)

Thats it...But be careful i have tried this on my router only after i have got the firmware upgraded...coz i crashed even my newly replaced router  :p

FYI, the bug-free firmware ver. No is V2.00B01T01.ML.20050530
The last 8 digits are the key and indicate the date of the it backwards ie 30/05/2005 ...any prior date firmware is bound to have problems so dont try it before u upgrade  :)

HOw do i assign a static Ip to Lan???

i tried but was unable to setup
it just says connecting to wan port via pppe or something like that


New Delhi
Airtel FTTH
Under Home>>Lan assign the IP address as, Subnet mask as Click apply.Then under Home>>DHCP, select No DHCP..........Under DHCP Server>> Assign starting IP add as and ending IP as Again Apply. Save and reboot.