From few days i am facing Internet problems. I can't download nor can i browse through websites. The Adsl light continously starts blinking after every 1 min. I have checked my connections (have already lodged complaint with mtnl to check my telephone line). Reset settings of my router n number of times. Still the issue persists. Kindly let me know what to do. i am using D-Link DSL-2640T wireless ADSL router.
-
Amazon Deals - ToS - Warp
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
MTNL Triband Broadband ADSL Blinking
- Thread starter rdj2880
- Start date
- Replies 4
- Views 4,685
@ Raj. Every one is facing similar problems of disconnection. By the way, which plan do you use?
Kindly follow this thread
https://broadband.forum/mtnl-broadband/44009-mtnl-broadband-adsl-light-but-no-internet-connectivity/
Kindly follow this thread
https://broadband.forum/mtnl-broadband/44009-mtnl-broadband-adsl-light-but-no-internet-connectivity/
@ Krish
Do you have tutorial to configure wireless router to bridge? I am using D-Link DSL-2640T wireless ADSL router,Dell studio 17 laptop with windows vista and have mtnl 512 unlimited plan.
Below is the details obtained from the http://192.168.1.1 page
ADSL Status
ADSL status shows the ADSL physical layer status.
ADSL Firmware Version: 6.00.01.00 - 6.00.01.00 - 6.00.04.00 Annex A - 01.07.2b - 0.54
ADSL Software Version: V3.02B01T01.EU-C.20080306
Line State Disconnected
Modulation ADSL_2plus_AnxM
Annex Mode Annex A
Max Tx Power -38 dBm/Hz
Item Downstream Upstream Unit
SNR Margin 31 0 dB
Line Attenuation 0 0 dB
Data Rate 0 0 kbps
Device Information
Firmware Version : V3.02B01T01.EU-C.20080306
LAN
MAC Address 00:19:5B:98:28😀F
IP Address 192.168.1.1
Subnet Mask 255.255.255.0
DHCP Server Enabled
NAT Enabled
WAN
Virtual Circuit Pvc0 Pvc1 Pvc2 Pvc3 Pvc4 Pvc5 Pvc6 Pvc7
Status Not Connected
Connection Type PPPoE
IP Address N/A
Subnet Mask N/A
Default Gateway N/A
DNS Server N/A
https://www.speedtest.net
Do you have tutorial to configure wireless router to bridge? I am using D-Link DSL-2640T wireless ADSL router,Dell studio 17 laptop with windows vista and have mtnl 512 unlimited plan.
Below is the details obtained from the http://192.168.1.1 page
ADSL Status
ADSL status shows the ADSL physical layer status.
ADSL Firmware Version: 6.00.01.00 - 6.00.01.00 - 6.00.04.00 Annex A - 01.07.2b - 0.54
ADSL Software Version: V3.02B01T01.EU-C.20080306
Line State Disconnected
Modulation ADSL_2plus_AnxM
Annex Mode Annex A
Max Tx Power -38 dBm/Hz
Item Downstream Upstream Unit
SNR Margin 31 0 dB
Line Attenuation 0 0 dB
Data Rate 0 0 kbps
Device Information
Firmware Version : V3.02B01T01.EU-C.20080306
LAN
MAC Address 00:19:5B:98:28😀F
IP Address 192.168.1.1
Subnet Mask 255.255.255.0
DHCP Server Enabled
NAT Enabled
WAN
Virtual Circuit Pvc0 Pvc1 Pvc2 Pvc3 Pvc4 Pvc5 Pvc6 Pvc7
Status Not Connected
Connection Type PPPoE
IP Address N/A
Subnet Mask N/A
Default Gateway N/A
DNS Server N/A
https://www.speedtest.net
@ Krish
Do you have tutorial to configure wireless router to bridge? I am using D-Link DSL-2640T wireless ADSL router,Dell studio 17 laptop with windows vista and have mtnl 512 unlimited plan.
Below is the details obtained from the http://192.168.1.1 page
ADSL Status
ADSL status shows the ADSL physical layer status.
ADSL Firmware Version: 6.00.01.00 - 6.00.01.00 - 6.00.04.00 Annex A - 01.07.2b - 0.54
ADSL Software Version: V3.02B01T01.EU-C.20080306
Line State Disconnected
Modulation ADSL_2plus_AnxM
Annex Mode Annex A
Max Tx Power -38 dBm/Hz
Item Downstream Upstream Unit
SNR Margin 31 0 dB
Line Attenuation 0 0 dB
Data Rate 0 0 kbps
Device Information
Firmware Version : V3.02B01T01.EU-C.20080306
LAN
MAC Address 00:19:5B:98:28😀F
IP Address 192.168.1.1
Subnet Mask 255.255.255.0
DHCP Server Enabled
NAT Enabled
WAN
Virtual Circuit Pvc0 Pvc1 Pvc2 Pvc3 Pvc4 Pvc5 Pvc6 Pvc7
Status Not Connected
Connection Type PPPoE
IP Address N/A
Subnet Mask N/A
Default Gateway N/A
DNS Server N/A
https://www.speedtest.net
Problem lies with ur ADSL signal.. lodge a complaint.. tell them adsl light not stable.. 1504 pe complaint karo!
Do you have tutorial to configure wireless router to bridge? I am using D-Link DSL-2640T wireless ADSL router,Dell studio 17 laptop with windows vista and have mtnl 512 unlimited plan.
Below is the details obtained from the http://192.168.1.1 page
ADSL Status
ADSL status shows the ADSL physical layer status.
ADSL Firmware Version: 6.00.01.00 - 6.00.01.00 - 6.00.04.00 Annex A - 01.07.2b - 0.54
ADSL Software Version: V3.02B01T01.EU-C.20080306
Line State Disconnected
Modulation ADSL_2plus_AnxM
Annex Mode Annex A
Max Tx Power -38 dBm/Hz
Item Downstream Upstream Unit
SNR Margin 31 0 dB
Line Attenuation 0 0 dB
Data Rate 0 0 kbps
Device Information
Firmware Version : V3.02B01T01.EU-C.20080306
LAN
MAC Address 00:19:5B:98:28😀F
IP Address 192.168.1.1
Subnet Mask 255.255.255.0
DHCP Server Enabled
NAT Enabled
WAN
Virtual Circuit Pvc0 Pvc1 Pvc2 Pvc3 Pvc4 Pvc5 Pvc6 Pvc7
Status Not Connected
Connection Type PPPoE
IP Address N/A
Subnet Mask N/A
Default Gateway N/A
DNS Server N/A
https://www.speedtest.net
Problem lies with ur ADSL signal.. lodge a complaint.. tell them adsl light not stable.. 1504 pe complaint karo!