4mbps ? and plz can u post ur dialup method picture ?
Refer below page which i am too found out after some googling...
but in this method use have to use apn of MTNL instead of Bsnl's APN in initialization step...
I am not sure whether this method will work for all modems..BUT DO IT AT YOUR OWN DESCRETION.
The following is extract from some user who posted on another forum....
"
There is workaround for this problem. That is to use
windows dial-up.
This works for me and should work for you, still DO IT AT YOUR OWN RISK!. I dont take any responsibilty of something going wrong to your system.
1) I assume that you have installed the bundled [COLOR=#000099 !important]software[/COLOR] inside the USB 3G data card and you can connect the 3G internet form it AND the device is connected to the system.
2) Open Device Manager. The "HSPADataCard [COLOR=#000099 !important]USB Modem[/COLOR]" should be listed there. [COLOR=#000099 !important]Right click[/COLOR] to open properties. In the open window choose the "Advanced" tab. In the 'extra initialization commands:' enter at+cgdcont=1,"IP","bsnlnet". click OK to close the window.
image:
Find attached images
3) From [COLOR=#000099 !important]Control Panel[/COLOR] open "Network and [COLOR=#000099 !important]Sharing[/COLOR] Center". From the left hand pane click "Change Adapter [COLOR=#000099 !important]Settings[/COLOR]". You should see a dial-up connection for your 3G Modem.Right click and choose properties. Select the "General" Tab. In the [COLOR=#000099 !important]Phone Number[/COLOR] box enter *99# Create a shortcut to the dial-up connection on your desktop. (If not you will have to create Dial-up connection in "Network and Sharing Center". See bottom of the post)
image:
Find attached images
4) Select the "Options" tab make changes as follows :
Check "Display [COLOR=#000099 !important]progress[/COLOR] while connecting"
Uncheck all others.
Enter "Redial attempts" 99
Enter "Time between redial attempts" 1 Second
Enter "Idle time before hanging "never"
Check "Redial if line is dropped"
Click OK
image:
Find attached images
DONE!
Right Click the dial-up connection and click "Connect"
Your internet should be running now.
Now windows automatically attempts to connects to the modem if line is dropped.
Note: Dont connect through your BSNL software! It should stay running in the background. you may minimize it to sys tray.
[To Create Dial-up connection open "Network and Sharing Center". Click "Setup a new connection or network". Click next. Follow the instructions. Enter phone no as *99# when prompted. Leave username and password blank when prompted.]"
----------