Is there VOIP service/SIP settings in AIRTEL xtreme fiber broadband

[Arunesh Dutta]

Hello all wanted to know is there any VOIP settings for AIRTEL xtreme fiber users if so how to access same using SIP settings ..thx

 

[haiderali176]

Can someone help with setting VoIP?
I own an HG8145V5 connected to a Netgear Nighthawk.

The Huawei router is at 192.168.2.1 and the Netgear one is at 192.168.1.1 & 192.168.2.3.

In the Huawei config, I have added the following static route:

I can't ping the proxy server IP Addressed, and the Android Client is showing Registration Failed (60) or Timeout (408) sometimes

 

[him001]

Hey guys I think airtel is not intended to give landline number access on your mobile like Jio does that's why no one at their tech/support end aware of this fact.

 

[teletalk]

can someone pls help with the ZTE ONT.
I have configured the static routes, but not able to reach the voip gateway from the client..
from the ONT I am able to ping voip gateway
what could be the possible reasons?

 

[drtech]

@rajil.s I somewhere read you are using Airtel SIP as a trunk through FreeSwitch, can you post the trunk config here as I am trying to do the same with my FreePBX

 

[rajil.s]

@drtech. I am using fusionpbx as frontend. The registration settings are:

Username:+91fullnumber
Password:Huawei@1
Proxy:ims.airtel.in
Expire seconds: 3600
Auth Username:+91fullnumber@ims.airtel.in
Register transport: UDP

ims.airtel.in is defined as follows:

# cat /etc/hosts
127.0.1.1       voip1
127.0.0.1       localhost
::1             localhost ip6-localhost ip6-loopback
ff02::1         ip6-allnodes
ff02::2         ip6-allrouters
10.232.133.130 ims.airtel.in

 

[Iftikhar]

@rajil.s
Hello can you tell me the password of zte router as after a long search I was not able to find it in my logs.

 

---

[rajil.s]

I dont have a ZTE router.

 

[Roshith]

@tellanand i am using airtel static ip with bridge mode in that case do i need to set VLAN 660 on my windows machine ? my voip range is coming 10.235.183.X range in that case do i need to add route route add 10.235.0.0 mask 255.255.255.0 10.235.183.1 and my gateway is 10.235.183.1

 

[rajil.s]

Airtel updated the settings on the Huawei router. The domain changed from ims.airtel.in to ue.ims.airtel.in. Unfortunately the Huawei@1 password no longer works.

Is there any log on the ONT which can dump the password?

 

[rsk11584]

can anyone explain what is the use of VOIP or SIP on home routers. just finished the migration of our office phone from PRI to SIP, the PRI copper line had got cut and Airtel said to migrate to SIP. From an existing leased line airtel modem they configured other port for SIP and multiple technical parameters were involved and had to check the settings so every call goes from the Airtel Modem to SBC to PABX to our IP Phones on desk, hence this was major project. But how does this work on normal homes, how exactly will this voip be useful for individual ? Cant you connect a normal phone to Airtel Modem just like i did at home to make / receive calls?

 

[vicious_geek]

Hey @rajil.s, I have set up my FusionPBX server and I'm able to make outgoing calls but I'm having a problem with incoming calls.

I believe my Gateway configuration is correct (I referred to one of your older messages),

Going through the logs I notice this:
<incoming phone number>@nowhere instead of <incoming phone number>@ims.airtel.in
Which means the server is seeing the incoming call, but something is not configured correctly. I was wondering if you could help me out with this. Thanks a lot

 

[vicious_geek]

Turns out I did not configure my ACLs correctly. Just wanted to let everyone know everything is working properly now.

 

[divgup1986]

Hi all ,
I am using Airtel in Delhi.
I have attached my Microsip settings I am using Huwaei router, I am using Huawei@1 password but i am unable to get the connection working can you please guide.
Here is log from my router

Dec 26 18:55:44 (none) kern.warn kernel: Call-ID: wffNoEO 14:22:21.021 sip_endpoint.c Response msg 200/OPTIONS/cseq=15404 (rdata0xa76b54) from 10.232.130.170:5060 was dropped/unhandled by any modules
Dec 26 18:55:44 (none) kern.warn kernel: Via: SIP/2.0/UDP 100.98.153.107:5060;branch=z9hG4bKPjreaB-Fwp3LmMj9NZsqAyPJQp0CG3XVjT;rport=5060^M
Dec 26 18:55:44 (none) kern.warn kernel: SIP/2.0 200 OK^M
Dec 26 18:55:44 (none) kern.warn kernel: Via: SIP/2.0/UDP 100.98.153.107:5060;rport;branch=z9hG4bKPjreaB-Fwp3LmMj9NZsqAyPJQp0CG3X 14:22:21.020 pjsua_core.c RX 495 bytes Response msg 200/OPTIONS/cseq=15404 (rdata0xa76b54) from UDP 10.232.130.170:5060:
Dec 26 18:55:44 (none) kern.warn kernel: OPTIONS sip:*********@10.232.130.170 SIP/2.0^M
Dec 26 18:55:44 (none) kern.warn kernel: 14:22:20.997 pjsua_core.c TX 395 bytes Request msg OPTIONS/cseq=15404 (tdta0xa8efc0) to UDP 10.232.130.170:5060:
Dec 26 18:55:44 (none) kern.warn kernel: 14:22:20.996 pjsua_acc.c Create Request acc 0 target sip:***********@10.232.130.170
Dec 26 18:55:44 (none) kern.warn kernel: 14:22:20.996 pjsua_acc.c Sending 2 bytes keep-alive packet for acc 0 to 10.232.130.170:5060
Dec 26 18:55:44 (none) kern.warn kernel: 86a, flush one!

 

[Cronus]

Recenlty i got my new connection of Airtel Xstream broadband DASAN Networks(H660GM-A), I don't want to use landline telephone, wanted to use VoIP/SIP softphone, I tried several things i kenw but nothing worked out, Please help, setting up. These many details I have gathered SIP server, Proxy Server, domain from logs and router.
how to setup?

 

[tinkertyler]

Any luck with DASAN routers (DZS)?