How to Configure MT882 modem in Bridge mode

silentwarrior

silentwarrior

Newbie
Messages
5
Location
NA
ISP
MTNL
Hi, How can I configure the MT882 modem in Bridge mode? Currently it is connecting using the PPoE in Triband, but there seems no way to bring it on Bridge mode. Is it necessary that I can only connect through PPoe mode? (No dialers used)
 
SmartAX MT-882 ADSL MODEM MENU
Select in WAN page "Bridged".
You need a dialer to connect ( WAN miniport)
 
Hi Essbee,

Mine is the MT882, but different to look at. Even it admin iterface is different in look.

The Modem info is

Product InformationModel Number AR7WRDHW Revision UnknownSerial Number A17831B004944USB PID 0x6060USB VID 0x0451Ethernet MAC 00:19:36:01:88:83DSL Default MAC 00:19:36:02:88:83USB MAC 00:19:36:00:88:83USB Host MAC 00:19:36:00:00:00Software VersionsGateway 3.7.2ATM Driver 7.02.01.00 DSL HAL 7.02.01.00 DSL Datapump 7.02.03.00 Annex ASAR HAL 01.07.2c PDSP Firmware 0.54 Boot Loader 1.4.1.5

and on top 0f the modem it is written MT882
 
Basically all modem settings are same.
VPI/VCI is different for different ISP's. Since you are already connected no problem here.
Select the WAN page and select "bridged." instead of PPP/PPPoE.
http://i22.tinypic.com/152byh3.jpg
( If Possible post screen shot of Device status and WAN page of your modem )
Save and reboot.
You have to use an external dialer ( without entering Telephone number ) now to connect.
 

Top