Help with Asus N13U B1

[mpaspc]

Guys after i have installed DD-WRT , i am not able to configure the router to work with My Sam 300 Ax router . The modem is In Bridge Mode , and on the Router i have changed it to PPOE mode and used my Telephone no. and Ca no. as password . I know these no.s are right , but still i cannot access internet . Am i missing something ?someone who configured This router with Mtnl , can you guys help me ?

 

[essbebe]

STERLITE SAMAX300
Check this guide by MTNL Delhi.
http://mtnldelhi.in/services/con_s.doc

(1)Select LAn ports as indicated. for PPPoE mode LAN1 and LAN4.

(2) Deactivate all PVCs except one with VPI/VCI 0 and 32
Status Device info default page PVC0.
Feedback.

 

[mpaspc]

http://content.screencast.com/users/abhishek.agg/folders/Jing/media/4334d2d6-a145-464a-b3c4-1b335cdd18d9/2012-02-16_1408.png

now what ?

 

[x720]

Let mtnls modem remain in bridged mode as it was earlier. In DD wrt s interface, select pppoe and enter usernane and password. Double check with customer care for udername and pw. While I prefer this method instead of setting up pppoe in the modem, you wont be able to access the MTNL modem's interface via the n13u.

 

[mpaspc]

i now , still no access , PVC 0 is PPOe and rest are bridged , waiting for Essbebe to reply , i couldn't get it to work with the normal procedure

----------

if this be of any help http://content.screencast.com/users/abhishek.agg/folders/Jing/media/af4161c1-93ef-43c7-b972-1e01c3961b48/2012-02-16_1433.png

 

[mpaspc]

help me guys , @Admin - I can't send PM to anyone why ?

 

---

[Sushubh]

you should be able to send PM to people who are accepting and can receive PMs.

 

[mpaspc]

Thanks for the clarification , tried sending pm's to about 3 of them since the past week , couldn't send even one .is Essbebe accepting PM ?

 

[Sushubh]

the error message could be helpful.

 

[essbebe]

replied. Check your Inbox.
You appear connected to Internet.
http://content.screencast.com/users/abhishek.agg/folders/Jing/media/af4161c1-93ef-43c7-b972-1e01c3961b48/2012-02-16_1433.png
Check Diagnostics page.
Enable DHCP in LAN menu.
Feedback.

similar model Beetel110TCI mine now: some entries Not available in your model.
Downstream Upstream
SNR Margin 36.9 21.1 db
Line Attenuation11.0 11.7 db
Data Rate2048 507 kbps
Attainable Rate12752 876 kbps
Out Power0.0 9.3 dbm
CRC Down/Up(db)0/ 0
HEC Down/Up(db)0/ 0
Adsl Status Connected

 

[mpaspc]

i get no error message , just that they don't come in my sent folder ! , so i would never no , what happened to them

----------

which diagnostics page are you refering ?


DHCP is already enabled in the LAN menu (modem page )

 

[essbebe]

IN Sterlite SAM AX300 see top menu. Maintenance /Diagnostics>
Testing Ethernet LAN connection ... PASS
Testing ADSL Synchronization . PASS
Testing ATM OAM segment ping ...PASS ( *fail does not matter)
Testing ATM OAM end to end ping ... PASS(*fail does not matter)
>> Ping Primary Domain Name Server .PASS>>
Ping Yahoo! ... PASS

 

[mpaspc]

[TABLE="width: 760, align: center"]
[TR]
[TD="class: tabdata"] >> Testing Ethernet LAN connection ...[/TD]
[TD="class: tabdata"]PASS
[/TD]
[TD] [/TD]
[/TR]
[TR]
[TD="class: light-orange, bgcolor: #E7E7E7"] [/TD]
[TD="class: light-orange, bgcolor: #E7E7E7"][/TD]
[TD] [/TD]
[TD="class: tabdata"] >> Testing ADSL Synchronization .[/TD]
[TD="class: tabdata"]PASS
[/TD]
[TD] [/TD]
[/TR]
[TR]
[TD="class: light-orange, bgcolor: #E7E7E7"] [/TD]
[TD="class: light-orange, bgcolor: #E7E7E7"][/TD]
[TD] [/TD]
[TD="class: tabdata"] >> Testing ATM OAM segment ping ...[/TD]
[TD="class: tabdata"]FAIL
[/TD]
[TD] [/TD]
[/TR]
[TR]
[TD="class: light-orange, bgcolor: #E7E7E7"] [/TD]
[TD="class: light-orange, bgcolor: #E7E7E7"][/TD]
[TD] [/TD]
[TD="class: tabdata"] >> Testing ATM OAM end to end ping ...[/TD]
[TD="class: tabdata"]FAIL
[/TD]
[TD] [/TD]
[/TR]
[TR]
[TD="class: light-orange, bgcolor: #E7E7E7"] [/TD]
[TD="class: light-orange, bgcolor: #E7E7E7"][/TD]
[TD] [/TD]
[TD="class: tabdata"] >> Ping Primary Domain Name Server .[/TD]
[TD="class: tabdata"]FAIL
[/TD]
[TD] [/TD]
[/TR]
[TR]
[TD="class: light-orange, bgcolor: #E7E7E7"] [/TD]
[TD="class: light-orange, bgcolor: #E7E7E7"][/TD]
[TD] [/TD]
[TD="class: tabdata"] >> Ping Yahoo! ...[/TD]
[TD="class: tabdata"]FAIL
[/TD]
[/TR]
[/TABLE]

 

[essbebe]

(1)
confirm you are connected to Internet and can surf as per PM to me.

(2) if above oK in WAN settings select Dynamic IP in Asus.

http://klseet.com/images/stories/RT-N13U-B1/2011-05-28%2016.24.52.jpg

 

[mpaspc]

connected to internet , failed the last 4 test on the diagnosrics page though .PS - i cannpt see the image you posted