Your Connection is just fine. Just some little tips in accordance to your new experience as a torrent user if you have the time..
1. Cap your upload
Limit your upload speed to approximately 80 percent of your maximum upload rate. You can check your upload speed over here (never trust your isp).
https://www.dslreports.com/stest .Once you know your maximum upload speed, change the max upload (to 80%) speed in your torrent client’s preferences.
Don’t get me wrong, everyone should share as much as possible, but if your upload rate reached it’s max, your download rate suffers significantly.
When capping your upload speed, remember that the BT protocol favors the faster connections. Basically, someone is more likely to give you the pieces you need, if you are giving them the pieces they need. Upload faster, download faster. So when capping your upload speed, don't think that setting REALLY low will help, because it won't. It will slow your downloading down as well. The 80% rule is just that, a RULE. Do it for the best performance.
2. Hack the max TCP connections
If you’re on XP sp2, your TCP connections are limited to a maximum of 10. This seriously hurts your downloading speed because it wont let you connect to a high amount of ip numbers. It is supposed to slow down viruses because their spreading strategy is to connect to a high amount of ip numbers, but it also cripples your torrent downloads.
A nice way to fix this is to download this patch;
CODE
http://www.lvllord.de/?url=downloads&lang=en
it allows you to set the maximum allowed connections to any number you want. Any number between 50 and 100 is ok (more on this here)
CODE
http://blog.davidkaspar.com/archives/2005/...ent-id-4226.php
3. Check seeds and peers
A simple tip, but so very important. Always look for torrents with the best seed/peer ratio. The more seeds (compared to peers) the better (in general). So 50 seeds and 50 peers is better than 500 seeds and 1000 peers. So, be selective.
4. Change the default port.
By default, bittorrent uses a port 6881-6999. Bittorrent accounts for a lot of the total internet traffic (1/3), so isp’s like to limit the connection offered on the these ports. So, you should change these to another range. Good clients allow you to do this, just choose anything you like. If you’re behind a
router, make sure you have the ports forwarded or UPnP enabled.
5. Disable
Windows Firewall (or at least configure it to allow exceptions)
It sucks. Windows Firewall hates P2P and often leads a life of it’s own. So disable it and get yourself a decent firewall, sygate or outpost for example. Windows firewall is not the best. Even after you disable it, it has a tendancy to turn itself back on from time to time, usually after you install Windows updates. So it is best to allow your BT client as an exeption, and/or add the port(s) you will be using to the exeptions, to allow for situations where it turns itself on without you knowing. That way, if it does, your torrenting can continue unabated.
1:1 is a healthy ratio...but guyz like us with internet speeds like these seldom get a chance of givin back what we download so i would suggest opting for a public tracker rather than a private tracker.
Lastly if someone needs to go into more torrent optimisation they can follow this link...:
http://torrentfreak.com/?s=configuring+bit+comet
@gsgs : Chill dewd...the second point i gave explains your worry i suppose. So if you are runnin on SP2 then i guess you know what to do.
🙂