Got stuck to setup a wirless network with a dlink adsl 2+ router and dir-300 wirless G router.

  • Thread starter Thread starter koushik.d
  • Start date Start date
  • Replies Replies 4
  • Views Views 5,071
K

koushik.d

Newbie
Messages
2
Location
NA
ISP
Bsnl
:wall:I have bsnl broad band connection. iwant to share it for 4 pcs and 2 laptop in my home office. I have a adsl 2+ modem (D-Link GLB-502T) by which i can connect to internet using either pppoe or bridge mode. It's default ip is 192.168.1.1. I have tried to configured the wireless G router dir-300 as per the diagram mentioned in the manual. While configuring the wireless wrouter using the setup user it's detecting the network but unable to find any internet net connection and showing an error code : 103. I have already tried setting the adsl moden into pppe and bridge mode even resetting the modem. But i'm able to connect to internet with the same modem directly. I have already change the ip of the dir-300 wirless router into 192.168.1.2 but while and turned on the dhcp in dir-300 and pcs which are connected into the 4 lan port is picking up the ips. I also configured the wirless network putting an ssid name. but any of the laptop is recognizing the wireless network and also unable to ping the adsl modem (192.168.1.1) from any of the pc though all the ips belongs to same range. Pls help me to get rid out of this problem asap.
 
Use "always on Connection " for Glb502T.
Enable DHCP
Range 192.168.1.3 to say 192.168.1.30
In TCP/IP all computers laptop select '
Obtain IP address automatically "
Change Dir300 IP address to 192.168.2.1

2. Start/Network LAN status support
see all iP addresses filled up. in each computer.
3. same for wireless network.
4. Try WIFI unsecured then secured.

Para two:
1. IF you have glb502T working with LAN cable connected to computer.
REFERENCE:
D
1A. check Internet is Ok and surfing is normal.
2. Now remove rj45 cable from computer and connect toDir300 WAN port.

Part 2:
3. Connect Rj45 from LAN1/2/3/4 of dir300 to desktop/laptop computers

3A.
Wireless router setup guide - India Broadband Wiki
3B Or see the video
YouTube - Netgear WGR614 Wireless Router (similar)
4. After configuring Check step 1A..
5 Make wireless settings in dir300.
6. remove Rj45 from laptop..
7. IN LAPTOP Network show all connections
Wireless Network Status ? secured/ unsecured network ?
Working OK ? do you see other wireless networks ?
Feedback.


India Broadband Forum - Threads Tagged with dlink
 
hi, essbebe, thanks for your suggetion. i think dir300's ip will be 192.168.1.2. all the pcs are are picking the ip of the range (192.168.1.100-199) which is preconfigured in dir300's dhcp option. i am able to ping 192.168.1.2 from each of the laptop and pcs but unable to ping to glb502t(192.168.1.1). ialso used the always on connection in glb502t all the lights adsl, ppoe are ok ie internet is connected but dir300 is unable to recognize any internet connection. i think this is happening because of the connectivity is not established between gbl5002t and dir300. waiting for your feedback
 
ADSL modem 192.168.1.1 dhcp 192.168.1.2 to 192.168.1.254
Vonage 192.168.15.1
Netgear WIFi 192.168.2.1
( all units settings can be accessed )
In use for past 8 months.
laptop 192.168.2.2
Account Name WGR614v6
Firmware Version V2.0.13_1.0.13NA

Internet Port
MAC Address 00:14:6C😀C:6E:53
IP Address 192.168.15.2
DHCP DHCPClient
IP Subnet Mask 255.255.255.0
Domain Name Server
192.168.1.1

LAN Port
MAC Address 00:14:6C😀C:6E:52
IP Address 192.168.2.1
DHCP ON
IP Subnet Mask 255.255.255.0

Wireless Port
Name (SSID) KK
Region United States
Channel 11
Mode Auto
Wireless AP ON
Broadcast Name ON

Addl reference;http://socrates0.blogspot.com/2007/12/how-to-configure-linksys-wrt54g.html
 

Top