Hello I know this problem is getting common getting randomly being disconnected from ADSL router , I complaint to this Sarkari babu's , i only get a call from exchange saying " kya Sab Theek hai " ( is it all right )? i am getting blinking light on ADSL .. the line seems ok i even checked it using the phone on same connection which i used for ADSL router it has no noise , in some other thread someone suggested using G.DMT ( ADSL Modulation type ) which didnt work on Bridge Mode , i just tried all this any other geniues suggestions lol 😗 . P.S can this be a conspiracy of babus getting back on Free night downloads plans 😛 ..just a thought .. :hysterical:
-
Amazon Deals - ToS - Warp
Frequent Disconnection ADSL ? Bridge Mode
- Thread starter Ninja
- Start date
- Replies 5
- Views 3,244
After almost a year of MTNL usage, you have frequent disconnection/s.
Please give make of modem, snr and attn details. and Tariif plan/speed
Your splitter could have gone faulty.( line voltage DC 40 to 60V applied via ADSl port to Phone .
using G.DMT ( ADSL Modulation type which didnt work on Bridge Mode ,
wrong conclusion. Post screen shot of ADSL status page.
Please give make of modem, snr and attn details. and Tariif plan/speed
Your splitter could have gone faulty.( line voltage DC 40 to 60V applied via ADSl port to Phone .
using G.DMT ( ADSL Modulation type which didnt work on Bridge Mode ,
wrong conclusion. Post screen shot of ADSL status page.
gadgetcrazy
Regulars
I am intermittenly facing this problem too.I thought it was solved but now again i am facing this problem,is it exchange specific?I am on 749 NU.
After almost a year of MTNL usage, you have frequent disconnection/s.
Please give make of modem, snr and attn details. and Tariif plan/speed
Your splitter could have gone faulty.( line voltage DC 40 to 60V applied via ADSl port to Phone .
wrong conclusion. Post screen shot of ADSL status page.
Thanks for ur reply
i have router T-Kd 318- EUI ( model number : UT 300R2U ) yes i am also trying to change my splitter ( i was using internet without it without any problems ... but anyway i will get it changed n use splitter , i made a complaint today ) i am not able to get the voltage part , could u explain more ... i am also attaching picture in this link ..
http://i28.tinypic.com/j67thz.jpg
Please give make of modem, snr and attn details. and Tariif plan/speed
Your splitter could have gone faulty.( line voltage DC 40 to 60V applied via ADSl port to Phone .
wrong conclusion. Post screen shot of ADSL status page.
Thanks for ur reply
i have router T-Kd 318- EUI ( model number : UT 300R2U ) yes i am also trying to change my splitter ( i was using internet without it without any problems ... but anyway i will get it changed n use splitter , i made a complaint today ) i am not able to get the voltage part , could u explain more ... i am also attaching picture in this link ..
http://i28.tinypic.com/j67thz.jpg
Phone line===>>> rj11==>> splitter==>>PHONE PORT..==>>ALL phones
................................................==>> ADSL PORT===>>RJ11==>>modem
The voltage is present in Telephone line for ringers. You will get a mild shock if you touch the line !
Check SNR and Attenuation figures again.
Now you are in ADSL+2 mod . will change it later if needed.
Splitter cost about Rs 50/= buy from electronic shop. ( marked adsl /phone etc)
Electrical dealers may give you for telephone only.
................................................==>> ADSL PORT===>>RJ11==>>modem
The voltage is present in Telephone line for ringers. You will get a mild shock if you touch the line !
Check SNR and Attenuation figures again.
Now you are in ADSL+2 mod . will change it later if needed.
Splitter cost about Rs 50/= buy from electronic shop. ( marked adsl /phone etc)
Electrical dealers may give you for telephone only.
Phone line===>>> rj11==>> splitter==>>PHONE PORT..==>>ALL phones
................................................==>> ADSL PORT===>>RJ11==>>modem
The voltage is present in Telephone line for ringers. You will get a mild shock if you touch the line !
Check SNR and Attenuation figures again.
Now you are in ADSL+2 mod . will change it later if needed.
Splitter cost about Rs 50/= buy from electronic shop. ( marked adsl /phone etc)
Electrical dealers may give you for telephone only.
Thanks for Explaining the Phone line part 🙂
in my case i am using USB driver for connection i have NIC card also which is also attached but i am using on USB connectin in bridge mode .. to Connect .. for the splitter part yes i was using without any much problem until this happend anyway it seems running better without it somehow .. but i still get disconnection but in less frequency :thumbsup:.. and just to add to it using prog like SKYPE i get somewhat often disconnected maybe its a coincidence .. thanks for the support but i am trying to get a new splitter and then use n check if any difference i find ... :ashamed: ..
Snapshot at 2.36 Pm again .. !!
................................................==>> ADSL PORT===>>RJ11==>>modem
The voltage is present in Telephone line for ringers. You will get a mild shock if you touch the line !
Check SNR and Attenuation figures again.
Now you are in ADSL+2 mod . will change it later if needed.
Splitter cost about Rs 50/= buy from electronic shop. ( marked adsl /phone etc)
Electrical dealers may give you for telephone only.
Thanks for Explaining the Phone line part 🙂
in my case i am using USB driver for connection i have NIC card also which is also attached but i am using on USB connectin in bridge mode .. to Connect .. for the splitter part yes i was using without any much problem until this happend anyway it seems running better without it somehow .. but i still get disconnection but in less frequency :thumbsup:.. and just to add to it using prog like SKYPE i get somewhat often disconnected maybe its a coincidence .. thanks for the support but i am trying to get a new splitter and then use n check if any difference i find ... :ashamed: ..
Snapshot at 2.36 Pm again .. !!