F670Lv9.0 telnet access

[SpeedxThunder]

so i was searching the internet and found some posts regarding unlocking of zte ont idk how useful they are

https://www.jarvisw.com/?p=1517

Note/家庭宽带配置H2-3E.md at 578b7e99dd80022c0ee8fa14a8851d8107279320 · ixmu/Note

Contribute to ixmu/Note development by creating an account on GitHub.

github.com

but following them idk somehow i got telnet access



but now i dont have much knowledge about telnet so i cannot proceed further

 

[thisiscorgi]

dang gotta translate the page

 

[thisiscorgi]

so i just run that command in cmd with fiber cable unplugged?

 

[nishantt6969]

yes^

 

[thisiscorgi]

unfortunately this does not work on netplus zte router V9.0.11P11N2

btw is this random or a unique credential?

does it change everytime you run?

 

[SpeedxThunder]

@thisiscorgi try this GitHub - zainarbani/ztelnet

 

---

[SpeedxThunder]

Source
this guy is also using same method to unlock it
just need to know the particular telnet commands needed for zte

 

[SpeedxThunder]

its same as Nokia one we just need to change the id to ZTEG and it will get unlocked

 

[SpeedxThunder]

out of context but this is interesting

Indian ISP Airtel: Working Configurations · Issue #127 · Anime4000/RTL960x

ISP: Airtel Country: India CPE: Sercomm Model: AOT-4221SR GPON SFP: ODI DFP-34X-2C2 (XPON) Video Tutorial for same https://youtu.be/MrVvszeQeuM Parameters changed/updated flash set OMCI_FAKE_OK 1 f...

github.com

 

[rohitks]

I get this error

c:\Temp>factorymode_crack.exe -l xxx open -i 192.168.1.1
version:3.1
CheckLoginAuth.gch WebRecv Fail!
Enter 192.168.1.1 Telnet FactoryMode Fail!

 

[User007]

Source

 

[rohitks]

It's the same process therein. I get same error even after running that bat file therein.
Software Version V9.0.10P1N16B

 

[SpeedxThunder]

@rohitks use this GitHub - zainarbani/ztelnet

 

[rohitks]

@SpeedxThunder - Yes that's what I originally used , my first post to this thread.
I think the crack uncovers the telnet login details

1. Checkloginauth.gch webrecv fail appears! You can check whether the optical fiber of the optical modem is plugged in. The factory mode must be used with the optical fiber unplugged , otherwise it will not succeed. If it is not successful, it may be that the model does not support it.

 

[SpeedxThunder]

No use the exact script.from the GitHub one the jarvisw site one is not working