Dd direct + channels not comming

  • Thread starter Thread starter pramitr1
  • Start date Start date
  • Replies Replies 5
  • Views Views 2,515

pramitr1

Newbie
Messages
71
Location
NA
ISP
BSNL
All other transponders r getting good signals except dd transponder.i hv tried aligning the dish both vertically and horizontally.but when dd is getting good signals, signals on all other transponders r coming down and vice versa. Plzzzzz help me out any 1.
 
This is the problem with Dish TV, even if some alignment is not gud DDD+ channels will be gone. Try aligning the Dish again.
 
That means their is some problem with your alignment , Just your alignment correct Then only you recieve all the channels with good signal strength.
 
That means their is some problem with your alignment , Just your alignment correct Then only you recieve all the channels with good signal strength.

Dear Please keep the home trasnponder signal strangth by 60~70 and you will get all the channels from NSS6 and INSAT 4B
 
YES I HV ALIGNED THE DISH.NOW DD CHANNELS R COMMING BUT 9X,MUSIC INDIA,B4U,Z SMILE N STAR UTSAV R GONE.IT SHOWS TRANSPONDERS 11150 AND OTHERS.PLZ HELP ME SM1.AND TO DAMADUM WHATS MORE IMPORTANT FOR GOOD SIGNAL- SIGNAL STRENGTH OR QUALITY?ALSO WILL THE OTHER TRANSPONDERS BE AFFECTED IF HOME TRANSPONDER STRENGTH IS KEPT BETWN 60 AND 70?THESE ARE THE DETAILS OF MY SIGNALS:-
NOT LISTED TRANSPONDERS ON SETUP IE B4U,9X,MUSIC INDIA,Z SMILE,STAR UTSAV ,ETC,ENTER 10.THESE TRANSPONDERS R NOT COMMING ON MY TRANSPONDER LIST :-
11570/V/27500 :- 0 STRENGTH N 0 QUALITY
11150/V/27500 :- SAME
11490/V/27500 :- SAME

LISTED TRANSPONDERS(READ BY STRENGTH AND QUALITY) AS SEEN BY MENU -->SETTINGS-->STB INFO-->SETUP

12688/V/27500(HOME TRANSPONDER) 43%(s sTRENGTH),55%(S QUALITY)
12595/V/40700 36%,47%
12534/V/40700 38%,50%
11172/H/27500 65%,74%
11038/H/40700 55%,66%
12595/H/40700 41%,55%
12647/H/27500 64%,73%
10990/V/27500 28%,34% (DD DIRECT +) N THE MAIN CAUSE OF CONCERN.
IF DD TRANSPONDER SIGNAL COMES RI8 ALL OTHER R LOW N VICE VERSA.

PLZ HELP ME SM 1.

---------- Post added at 10:13 PM ---------- Previous post was at 10:07 PM ----------

What should be the ratio between signal strength and signal quality for each transponder to receive error free signal?
 
That means still your alignment is not perfect, Just try to align again and check.
 


Top