D-Link DSL-502T Router Vs DataOne

[dxer]

I am unable to configure the router for the DataOne as certain values like PVC/VCI/VPI are not provided by BSNL. Has any body configured the router? 😛

 

[dxer]

Originally posted by dxer@May 31 2005, 01:13 AM
I am unable to configure the router for the DataOne as certain values like PVC/VCI/VPI are not provided by BSNL. Has any body configured the router? 😛
[snapback]10626[/snapback]

[/quote]

That is generalisation. I hope to come back in a day or two as I have heard that BSNL is using private firms in South Kolkata to setup these modems. I am trying to linkup with them. Will give the results here
73s de dxer

 

[agnivo007]

If u had followed my link, u could have found all required settings.If u intentionally don't see it, then sorry my hands are tied, can't help anymore.

 

[dxer]

Originally posted by agnivo007@Jun 2 2005, 01:01 AM
If u had followed my link, u could have found all required settings.

If u intentionally don't see it, then sorry my hands are tied, can't help anymore.
[snapback]11062[/snapback]

[/quote]

Am extremely sorry! Will tryout these suggestions today. Will be back with results by evening, I hope. Saturday was a day of power failures in North Kolkata. 73s de DXER🙁

 

[coolbuddy_79]

for MTNL VCI is 32, rest all is same...in case u want to try that...

 

[dxer]

Originally posted by dxer@Jun 5 2005, 08:22 AM
Am extremely sorry! Will tryout these suggestions today. Will be back with results by evening, I hope. Saturday was a day of power failures in North Kolkata. 73s de DXER🙁
[snapback]11380[/snapback]

[/quote] Thank you! The spy who loved Broadband! I am successful with your tips. The DSL 502T is blazing in our home. 73s de DXER

 

---

[punnu]

Originally posted by dxer@May 31 2005, 12:13 AM
I am unable to configure the router for the DataOne as certain values like PVC/VCI/VPI are not provided by BSNL. Has any body configured the router? 😛
[snapback]10626[/snapback]

[/quote]



i also have dsl502 adsl router n i m using dataone successfully .
its so simple to configure it :
step 1 open ur browser an give an ip add in add bar 192.168.1.1
give uid n pwd "admin "
step 2 go to run wizard at the bottom of the page
then click next
a window appears asking f pas. give" admin " in both field .
step3:
set the time as u r local settings then next
step 4
select pppoe/pppoa then next
then give uid n pwd provided by bsnl
put zero 0 in VPI field n 35 in VCI field
n connection type PPPoELLC
then click next n click restart to save settings .it will take about 1-2 mins t reboot
now u r ready to play in the world of INTErnet. if u stll have some probs u can mail me at amulya01@gmail.com i will be there f u


bye n have fun