Configuring BSNL Modem ZTEZX AII with Netgear WGR614 for wireless

[wobble]

Hello, I'm new here and this is my first post....I've recently gotten a ZTE ZX AII modem and I am able to connect to the internet finewith the modem and the laptop. When I try to connect the modem LAN output to thewireless router and then router output port (any of the 4) to my PC, net does not work.I am able to go to routerlogin.com and setup WIFI. The wireless network shows up and I am able to connect to it. Only thing is there is no internet connection.Any help is much appreciated. Here is ipconfig/all result:Windows IP ConfigurationWireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::e0d9:8aaa:e206:989c%12 IPv4 Address. . . . . . . . . . . : 192.168.0.3 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::319b:be2c:496e:5e65%11 IPv4 Address. . . . . . . . . . . : 192.168.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1Tunnel adapter isatap.{C8D1BD97-A88C-4858-AFC7-5DC2E73208AF}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . :Tunnel adapter Teredo Tunneling Pseudo-Interface: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . :Tunnel adapter Reusable ISATAP Interface {C5ECBEF9-8FC2-41C7-8676-F32CEFA7B819}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . :This is my Netgear router setting:Basic settings Page😀oes your internet require a login: YesInternet Service Provider: OtherUsername: The one provided by BSNLPassword: The one provided by BSNLDNS Address: Get automaticallyWAN Setup page:Connect automatically as requiredRest all setting sdefault on this pageZTE ZX Modem-------------------Default as instructed by BSNL (Always On Mode - PPPOE_35 UBR without PCR - SNAP/LLC - Always on - Username password as provided by BSNL).Been struggling with this for 4-5 days now 🙁Thanks!!

 

[essbebe]

@wobble


In Desktop

Network : Show all connections
LAN
properties
Network settings
Uncheck box IPv6 ( not used In INDIA Not needed )
select tcp/IP
properties
Next page
Select Obtain Ip address automatically
Obtain DNS same as above.
APPLY SAVE
Repeat for WLAN network.
2.

Please check my "Sticky"post WA3002_g4 and select MP bsnl link for
ZTE 831AII ? settings in PPPoE ( always On) mode.
Your userid and PW entered in wan page of modem.
Enable DHCP and give a range 192.168.1.3 to 192.168.1.10
Save Reboot and check connected to internet normally.

3. Now with Netgear connected
Basic Settings:

Does your Internet connection require a login ?
NO
Internet Ip address:
Get Dynamically From ISP
Domain Name Server(DNS) address
Get automatically from ISP
Router MAC address
Use Default address
APPLY wait...

Advanced Settings:WAN setup
Check box Connect automatically, as required
MTUSize (in bytes)1500 wait ...

LAN IP Setup

ip address 192.168.2.1
Ip subnet mask 255.255.255.0

Use Router as DHCP server
stating Ip address 192.168.2.2
ending Ip address 192.168.2.51
Apply wait...

Check router STATUS no BLANK COLUMNS.
Click Connection status
all filled up.
Recheck Ipconfig /all
feedback.
Now try. connecting desktop via Netgear.
Feedback.

 

[wobble]

I tried reading your thread but couldn't find the ZTE ZX AII specific settings. can you provide the exact URL to the sticky thread...Meanwhile I followed steps below and it seems to have party helped... Now I can connect to the wireless network and browse the internet using only 1 computer. If I try to connect another computer or another WIFI device, say a mobile phone that has wifi, even after providing WPA-PSK/TKIP password, I am unable to connect using any of the other computers wirelessly...Anything else that I might have missed?Thanks a lot for your help...

 

[essbebe]

I tried reading your thread but
couldn't find the ZTE ZX AII specific settings
can you provide the exact URL to the sticky thread...

https://broadband.forum/bsnl-broadband/50052-bsnl-broadband-utstar-wa3002-g4/2/#post331246

entry 027.

New Page 4

CONFIGURATION

Meanwhile I followed steps below and it seems to have party helped....................
Now I can connect to the wireless network and browse the internet using only 1 computer.
.

Congratulations.
You have not given the model number of ZTE ZXDSL ADSL modem.
It can be 831AII, but there are two or more firmware versions.

Open your modem menu pages.
192.168.1.1 userid admin PW admin
In Advanced options
WAN setttings ensure PPPoE is selected Not "bridged"
Username and PW stored in WAn page .
In LAN page usually, Enable DHCP give a range 192.168.1.3 to 192.168.10
Apply SAVE Go to Manaagement SAVE REboot.
Above instructions common to all modems.

2. If all OK copy/paste ipconfig /all data for LAN and WLAN
( tunnel data not needed ) for thread completion, and to compare previous
Ipconfig /all data.

 

[wobble]

First off, i should have said modem is 831 AIINot sure where to find "Advanced Options"Under Configuration tab I have:Local NetworkInternetDSL Home options. Under Local Network Configuration there are 3 tabs1. IP Address CofigurationPrimary IP Address:IP address:192.168.1.1Subnet Mask: 255.255.255.0Hostname: MyDSLModemDomain Name: local.lanSecondary IP Address: This section is blank2.DHCP Server DHCP Server on:Start IP address:192.168.1.3 Ending IP: 192.168.1.10Under Internet Configuration option the are the columns:ttonpppoe_0_35 Disconnect 0/35 UBR PPPoE LLC/SNAP On 117.192.49.191 I clicked on the edit option and it is in PPP over ethernet (PPPOE) radio button is checked...Under configure WAN settings: Use the following settings is checked with WAN IP of 117.192.49.191 and enable NAT and Add default route are also checked.On next page usersname/password etc. are all set correctly..Always on mode is enabledAfter all this, the summar page displays the following with an Apply button and a cancel buttonSummary Make sure that the settings below match the settings provided by your ISP. Internet(WAN) Configuration: VPI / VCI 0 / 35 Service Category UBR Without PCR Connection Type PPPoE LLC/SNAP, Always On PPPOE AC Not Configured PPPOE Service Name dataone NAT On WAN IP Address 117.192.49.191 Default Route On IPCONFIG on the wirelessly connected PC gives followingWindows IP ConfigurationWireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : IPv4 Address. . . . . . . . . . . : 192.168.2.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.2.1Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . :

 

[essbebe]

Please DELETE all in your previous post.
and repost following information.
1. confirm you get connected to Internet when computer/system switched on.
2. wifi router No changes.
3. whether more than one system can acccess internet now ?

4.the zte modem Device info looks like this.
only Board ID number important.
http://www.pcwintech.com/files/screenshots/beetel-110bx1/000.png

My ipconfig /all data Netgear wgr614 disabled.
edited and "copy/paste" here
Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Marvell Yukon 88E8055 PCI-E Gigabit Ether
net Controller
Physical Address. . . . . . . . . : 00-1D-BA-1C-4A-18
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Wednesday, July 13, 2011 3:47:44 PM
Lease Expires . . . . . . . . . . : Saturday, July 16, 2011 6:51:05 PM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 8.8.4.4
8.8.8.8
NetBIOS over Tcpip. . . . . . . . : Enabled

Wireless LAN adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) WiFi Link 5100 AGN
Physical Address. . . . . . . . . : 00-16-EA-4D-84-4E
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

 

---

[wobble]

Please DELETE all in your previous post.
and repost following information.
1. confirm you get connected to Internet when computer/system switched on.
2. wifi router No changes.
3. whether more than one system can acccess internet now ?

4.the zte modem Device info looks like this.
only Board ID number important.
http://www.pcwintech.com/files/screenshots/beetel-110bx1/000.png

My ipconfig /all data Netgear wgr614 disabled.
edited and "copy/paste" here

1. I get connected to internet when computer/system switched on. However it is only on that 1 laptop. I can connect wirelessly on that laptop
2. Didn't make any changes to the wifi router other than the morning settings you had asked me in the first post.. The router still has those settings
3. No

4. Below is information from the ZTE Modem summary page:
Equipment Vendor ZTE
Model No ZXDSL 831AII
Chipset Part No ZXDSL 831AIIV1.0.1i_D18_IN
Chipset Version No E.37.7.37



5. ipconfig/all shown below:
Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Atheros AR9285 Wireless Network Adapter
Physical Address. . . . . . . . . : 00-26-5E-F5-80-4F
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.2.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Wednesday, July 13, 2011 9:55:20 PM
Lease Expires . . . . . . . . . . : Thursday, July 14, 2011 9:55:20 PM
Default Gateway . . . . . . . . . : 192.168.2.1
DHCP Server . . . . . . . . . . . : 192.168.2.1
DNS Servers . . . . . . . . . . . : 192.168.2.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Generic Marvell Yukon 88E8057 PCI-E Gigab
it Ethernet Controller
Physical Address. . . . . . . . . : 00-24-BE-3C-33-B2
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

 

[wobble]

Not sure where my reply went but answers to your questions
1. yes, on only one laptop, i can wirelessly connect to the network. The network shows up on the other desktop but can not connect to it using the same password/WPA-PSK wireless settings as the latop.
2. ok
3. No
4. Device information from ZTE summary page:
Equipment Vendor ZTE
Model No ZXDSL 831AII
Chipset Part No ZXDSL 831AIIV1.0.1i_D18_IN
Chipset Version No E.37.7.37


5. ipconfig/all below

Wireless LAN adapter Wireless Network Connection:   Connection-specific DNS Suffix  . :   Description . . . . . . . . . . . : Atheros AR9285 Wireless Network Adapter   Physical Address. . . . . . . . . : 00-26-5E-F5-80-4F   DHCP Enabled. . . . . . . . . . . : Yes   Autoconfiguration Enabled . . . . : Yes   IPv4 Address. . . . . . . . . . . : 192.168.2.2(Preferred)   Subnet Mask . . . . . . . . . . . : 255.255.255.0   Lease Obtained. . . . . . . . . . : Wednesday, July 13, 2011 9:55:20 PM   Lease Expires . . . . . . . . . . : Thursday, July 14, 2011 9:55:20 PM   Default Gateway . . . . . . . . . : 192.168.2.1   DHCP Server . . . . . . . . . . . : 192.168.2.1   DNS Servers . . . . . . . . . . . : 192.168.2.1   NetBIOS over Tcpip. . . . . . . . : EnabledEthernet adapter Local Area Connection:   Media State . . . . . . . . . . . : Media disconnected   Connection-specific DNS Suffix  . :   Description . . . . . . . . . . . : Generic Marvell Yukon 88E8057 PCI-E Gigabit Ethernet Controller   Physical Address. . . . . . . . . : 00-24-BE-3C-33-B2   DHCP Enabled. . . . . . . . . . . : Yes   Autoconfiguration Enabled . . . . : Yes

 

[essbebe]

Not sure where my reply went but answers to your questions
1. yes, on only one laptop, i can wirelessly connect to the network. The network shows up on the other desktop but can not connect to it using the same password/WPA-PSK wireless settings as the latop.
2. ok
3. No
4. Device information from ZTE summary page:
Equipment Vendor ZTE
Model No ZXDSL 831AII
Chipset Part No ZXDSL 831AIIV1.0.1i_D18_IN
Chipset Version No E.37.7.37


5. ipconfig/all below

Wireless LAN adapter Wireless Network Connection:   Connection-specific DNS Suffix  . :   Description . . . . . . . . . . . : Atheros AR9285 Wireless Network Adapter   Physical Address. . . . . . . . . : 00-26-5E-F5-80-4F   DHCP Enabled. . . . . . . . . . . : Yes   Autoconfiguration Enabled . . . . : Yes   IPv4 Address. . . . . . . . . . . : 192.168.2.2(Preferred)   Subnet Mask . . . . . . . . . . . : 255.255.255.0   Lease Obtained. . . . . . . . . . : Wednesday, July 13, 2011 9:55:20 PM   Lease Expires . . . . . . . . . . : Thursday, July 14, 2011 9:55:20 PM   Default Gateway . . . . . . . . . : 192.168.2.1   DHCP Server . . . . . . . . . . . : 192.168.2.1   DNS Servers . . . . . . . . . . . : 192.168.2.1   NetBIOS over Tcpip. . . . . . . . : EnabledEthernet adapter Local Area Connection:   Media State . . . . . . . . . . . : Media disconnected   Connection-specific DNS Suffix  . :   Description . . . . . . . . . . . : Generic Marvell Yukon 88E8057 PCI-E Gigabit Ethernet Controller   Physical Address. . . . . . . . . : 00-24-BE-3C-33-B2   DHCP Enabled. . . . . . . . . . . : Yes   Autoconfiguration Enabled . . . . : Yes

All above noted.

1.
From POST NO 1:
I've recently gotten a ZTE ZX AII modem and I am able to
connect to the internet fine with the modem and the laptop

Please repost ipconfig /all for this setup. ( laptop on lan mode )
2
your zte model confirm menu pages similar.

can refer siemens c2110 for settings etc.

 

[wobble]

1. Ok for laptop on lan mode, directly connected to BSNL Modem

Wireless LAN adapter Wireless Network Connection:   Media State . . . . . . . . . . . : Media disconnected   Connection-specific DNS Suffix  . :   Description . . . . . . . . . . . : Atheros AR9285 Wireless Network Adapter   Physical Address. . . . . . . . . : 00-26-5E-F5-80-4F   DHCP Enabled. . . . . . . . . . . : Yes   Autoconfiguration Enabled . . . . : YesEthernet adapter Local Area Connection:   Connection-specific DNS Suffix  . : local.lan   Description . . . . . . . . . . . : Generic Marvell Yukon 88E8057 PCI-E Gigabit Ethernet   Physical Address. . . . . . . . . : 00-24-BE-3C-33-B2   DHCP Enabled. . . . . . . . . . . : Yes   Autoconfiguration Enabled . . . . : Yes   IPv4 Address. . . . . . . . . . . : 192.168.1.4(Preferred)   Subnet Mask . . . . . . . . . . . : 255.255.255.0   Lease Obtained. . . . . . . . . . : Thursday, July 14, 2011 8:40:48 AM   Lease Expires . . . . . . . . . . : Friday, July 15, 2011 8:40:48 AM   Default Gateway . . . . . . . . . : 192.168.1.1   DHCP Server . . . . . . . . . . . : 192.168.1.1   DNS Servers . . . . . . . . . . . : 192.168.1.1   NetBIOS over Tcpip. . . . . . . . : Enabled

2. Yes, my BSNL modem page looks exactly like the one you have shown in the picture.

 

[essbebe]

1. Ok for laptop on lan mode, directly connected to BSNL Modem

Wireless LAN adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix  . :
Description . . . . . . . . . . . : Atheros AR9285 Wireless Network Adapter
........................................
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:
Description . . . . . . . . . . . : Generic Marvell Yukon 88E8057 PCI-E Gigabit Ethernet
.......................................
2. Yes, my BSNL modem page looks exactly like the one you have shown in the picture.
 PROBLEM UPdate
yes, on only one laptop, i can wirelessly connect to the network.
The network shows up on the other desktop but can not connect to it using the same 
password/WPA-PSK wireless settings as the laptop.


Ok.   

(A)confirm Second 2nd system is desktop or laptop.
Connect  in lan mode and   also check wifi mode.
(B) if needed.
Back to NetgearWGR614 settings. .
Check under Advanced settings  .
Wireless.   confirm Access list is NOT enabled.
Details of systems  allowed not listed./filled up.
feedback.

 

[wobble]

Access control was on. Disabled it and now can connect on desktop, on my HTC HD Desire phone as well !!!Thanks a lot to you essbebe

 

[essbebe]

Access control was on.
Disabled it and now can connect on desktop, on my HTC HD Desire phone as well !!!

Thanks a lot to you essbebe
Congratulations:
Please BACKUP /SAVE present settings to say
C:/My Documents/wifiroutersetup ok.