Configuring Airtel Beetel 450TC1 ADSL2+ Router for local RJ45 cable internet

  • Thread starter Thread starter mihirX
  • Start date Start date
  • Replies Replies 2
  • Views Views 5,589
M

mihirX

Messages
2
Location
NA
ISP
Smartlink
Please help me configure my Airtel Beetel 450TC1 ADSL2+ Router for local RJ45 cable internet (my ip lookup suggests my ISP name as smartlinklink broadband services pvt ltd)

Have disabled VLAN, ACL, CWMP as read on various forums but still can't get it working, please help.

Here are my current settings:
Source


Thanks in advance 🙂
 
You can use it as an access point, because I think the Beetel 450TC1 does not have a WAN port. I assume that there is no cable modem. You will have the log in using a browser every 24 hours. At least that's how this setup usually works.

I don't know much about Beetel modems but to disable your DSL credentials, you can try
Interface-Setup > Internet > Encapsulation > Bridge Mode.
Save & restart.

Ethernet cable to Beetel.
Beetel to Laptop via wifi/Ethernet cable

See if you can browse now.
 
Thanks for your time 🙂 But I was not able to connect to internet over WiFi by doing that 🙁

Anyway, bought TP-Link TL-WR841N...: )
 
Last edited by a moderator:

Top