Configure VMC AN1020-21 with Windows dialer?

  • Thread starter Thread starter makubex
  • Start date Start date
  • Replies Replies 1
  • Views Views 3,821
M

makubex

Newbie
Messages
94
Location
NA
ISP
BSNL
HiI'd like to setup my VMC AN1020-21 modem in bridged mode so that it works with Windows dialer.I have set encapsulation to bridged in modem settings, but when I try to connect using the dialer, it times out at "Connecting through WAN miniport" and throws back Error 691.Because of this, my only option is to use Always On, which I'd rather avoid.Any input appreciated.Regardsmakubex
 
makubex said:
Hi

I'd like to setup my VMC AN1020-21 modem in bridged mode so that it works with Windows dialer.

I have set encapsulation to bridged in modem settings, but when I try to connect using the dialer, it times out at "Connecting through WAN miniport" and throws back Error 691.

Because of this, my only option is to use Always On, which I'd rather avoid.

https://broadband.forum/bsnl-broadband/61886-wifi-configuration-bsnl-vmc-an1020/2/#post416591
Check this post with screen shots.
https://broadband.forum/bsnl-broadband/61886-wifi-configuration-bsnl-vmc-an1020/2/#post41659
C modem on PPPoE
Reset the unit to factory settings.
Try the dialer and enter userID/PW in modem window.
If not connected
uncheck box PPP/PPPoE in modem and select Bridged"
Go to management and SAVE/Reboot.
Click to expand...
 

Top