cant find VIRTUAL SERVER SETUP for UT300R2U

[matrunner]

hi i am using UT300R2U adsl2+ router. i cant find virtual server setup option to port forward, which is normally said to be avail under option advance setup -> NAT for this type of router. but under mine NAT option it has 1ly DMZ host...no virtual server setup and port triggering option customer care people dont have any idea of this and they just disconnect the line.... hw to rectify this prob so that i can port forward and use utorrent and misc efficiently....

 

[essbebe]

please see my reply in thread "portforwarding UT330R2U"

 

[matrunner]

i read it....but i am not sure hw to make out a static ip....r i may be in with a static ip.... portforward.com gives in details but my prob is there is no such virtual server setup menu available under advanced in mine....

 

[subham]

I use UT-300R2U and i have a virtual server in advanced configuration.....post a screenshot of "advanced" page.

 

[matrunner]

this is my adv setup page ---> nat

1ly dmz host is present no virtual server setup r port triggering option

http://imageshack.us
Shot at 2007-07-03

direct link http://img412.imageshack.us/img412/8892/natit4.jpg

i am not in bridge mode....i just switch on router and pc connect to internet....not sure whether not being in bridge mode hampers this...!!!!!!!!

 

[subham]

I think you are using an older firmware. Search on this forum for UT-300R2U firmware upgrade.

 

---

[matrunner]

i got the router on june 7th 2k7....i cant find in firmware upgradation links avail in this forum....hope u can verify with urs and say as i ll give in my router software and firmware details... Board ID: 96338L-2M-8M Software Version: 3.08.BSNL_02.01.02_tr64. Bootloader (CFE) Version: 1.0.37-8.7 Firmware Version: UT300R2U.0011.01 Hardware Version: UT300R2U 2.2 Model Name: UT300R2U just check and say am i lagging in upgradation....if so if u do have any link to get it say it...

 

[cyberwiz]

try typing in http://192.168.1.1/main.html and see if u get the advanced options

I have the same router from MTNL but my software version is 3.00L.03.A2pB017l.d15h so may be u ahve a stripped down version of firmware

 

[matrunner]

k real thing is in this type i wont get a virtual server setup....i have to use DMZ host 1ly...i had used it...now my connections r proper....if had virtual server setup wud wud have utilised more efficiently...

 

[csocratess]

u said you've rectified ur problem......... please tell me how u did it............. i've got the same modem and d same problem.........

 

[visnbm]

See this link...
PortForward.com - Free Help Setting up Your Router or Firewall

 

[csocratess]

I've read thru the help on portforward dot com......... but then I donot have a virtual server option in my router's settings......... its the same as that of matrunner

 

[subham]

I use UT-300R2U too. Got it in june 2007. I live in Hyderabad. My device info says "Firmware Version: R1.00B02.3AS.BS"

 

[matrunner]

hi guys.....

yes u people are facing same old prob like mine...but i have rectified it....actually newly given UT300R2u doesn have virtual server setup.... there's another way to get ALL NETWORK CONNECTIONS ARE FINE IN torrents clients u use to get full speed... follow the procedure stated below...

start -> run -> cmd (xp)
know ur system ip address by typing ipconfig ...since bsnl it must be 192.168.1.x (above 3)
go to IE http://192.168.1.1
(router config page opens after typing admin, admin)
there advanced -> NAT -> dmz host
there type in ur ip address as found in cmd click save/apply this doesnt require reboot r any...just restart ur torrent client....

now ENJOy the best of speed

 

[subham]

DMZ is dangerous if you don't use a good firewall and antivirus.