For the same software bootloader version/HW board see this screen shot.
http://img76.imageshack.us/img76/3110/routeryy1.jpg
Connect in 'Always On" mode
Select PPP/PPPoE ( enter userIdPW in wan page
🙂
Try 192.168.1.1/main.html
then type 192.168.1.1/look.html ( may work . not sure )
to check whether any more details are available.
If page opens ignore the font/s Post the screen shot.
similar page for Beetel 220BXI ( NO WIFI)
Èí¼þ°æ±¾ V8.24.01.01
Èí¼þ±àºÅ T2Q-0Q-007 (* FIRMWARE VERSION)
SVN°æ±¾ 3.12L.01_India.13
±àÒëÈÕÆÚ Wed Apr 16 13:12:33 CST 2008
¹Ì¼þ°æ±¾ 3.12L.01.A2pB023k.d20k_rc2 ( *SOFTWARE has wifi option)
CFE °æ±¾ 1.0.37-0.7
IP µØÖ· 192.168.1.1
MAC µØÖ· 00-1e-40-ba-cc-44
ÉÏÐÐËÙÂÊ (Kbps) 1024
ÏÂÐÐËÙÂÊ (Kbps) 2560
. A Firmware update can be tried .AT YOUR OWN RISK !]
It is unlikely ,you have been supplied an unit without the WIFI IC.
2.
Copy/paste following info for LAN and WLAN
ipconfig /all
Feedback.
3. Check M.P Bsnl site for your ZTE model in this link.
https://broadband.forum/bsnl-broadband/50052-bsnl-broadband-utstar-wa3002-g4/
http://mp.bsnl.co.in/bb/zte/zte531.htm