NAT is your internal IP, which is not globally routable. Thats why you need to setup port forwarding, since the router wouldn't know where to route the connection to. In UT300R2U, go to Advanced, Virtual Server, and that is where you setup port forwarding.
I am also having the same router.to do the port forwarding i went to router page and i did some thing i dont know what did.now the page i not getting loaded for me .It gives me the following page see the screen shot
members/anbutorrent/
You have posted the error message.
Confirm ,1. you cannot access Internet for surfing
2. or access the modem by using 192.168.1.1 admin admin.
3.If 2 above restart the browser and try.
4. In some model of UT300R2U there is no virtual server option. http://aycu14.webshots.com/image/28973/2005831266046767882_rs.jpg
http://img362.imageshack.us/my.php?image=utstar300r2ubd8.jpg
Which is your model ?
5.If you are confident of reprogramming the modem, with power on
use reset button or recess of the modem to restore factory defaults.
@anbutorrentcheck out the back/side of your router. There would be a reset button which you would have to push using a pen/needle/pin or pointed object. Press it for around 5 seconds with the router on until the lights on the router go off and light up again. This would restore factory settings. Now you can edit the router settings by accessing 192.168.1.1.
/members/anbutorrent/You could have mentioned whether BSNL staff used the modem reset option and again reprogrammed the modem. and how you could access Port forwarding menu in the modemProbably you are using WANminiport dialer now
This website uses affiliate links. This means that if you click on a link and make a purchase, we may receive a commission. This does not affect the price you pay for the product.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.