Hello!Im a new member here on this lovely and friendly forum 🙂I have got BSNL Data One broadband in my home currently on the home 250 plan (1GB/mth), but in a couple of days it should be upgraded to UL 750 Plus which is unlimited.I have got a Belkin modem router (F5D7632-4) which I bought from the UK, but I am sure it will work here too. I have browsed through many threads to get the wifi settings to input in the router and have tried many different ones, but so far no luck. So I would really appreciate it if someone could please tell me the appropriate setting for this eg. is the PPPoA or PPPoE or IPoA or static or dynamic etc and all the relevant DNS IP address please!Thanks so much 😀
-
Amazon Deals - ToS - Warp
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Belkin router settings
- Thread starter hello30
- Start date
- Replies 34
- Views 32,562
superprash2003
Regulars
Too much "Amul" in beginning itself !
Haha.. LOL.. 🙂
Haha.. LOL.. 🙂
Welcome to broadbandforum.co
Too much "Amul" in beginning itself !
Type in Search Box above : Belkin modem router (F5D7632-4)
for older threads. I posted about this router in Dec 2007.
Haha I try to please 😀
Thanks for the reply! I tried the search thing, and the links and settings that I got were exactly the ones that I had tried and tested before posting here and they didnt work unfortunately 🙁
So just wanted to know if theres any other way around it??
Thanks once again
Too much "Amul" in beginning itself !
Type in Search Box above : Belkin modem router (F5D7632-4)
for older threads. I posted about this router in Dec 2007.
Haha I try to please 😀
Thanks for the reply! I tried the search thing, and the links and settings that I got were exactly the ones that I had tried and tested before posting here and they didnt work unfortunately 🙁
So just wanted to know if theres any other way around it??
Thanks once again
Start run cmd type ipconfig /allpost data.2. Whenin Start /Network/ Local area connectionif you try repair what is the error message ?3. Are you trying to connect in (a) dialer "bridged" wanminiport or (b) "Always ON" ppp/PPPoE connection ?4.Settings VPI/VCI 0 and 35 UserID In modem without @bsnl.in ( if used )PPPoE if selected or "Bridged "If possible post screen shot of connection status..
Hello
The cmd thing that you told me to type didnt give any results. Just to confirm, I typed "ipconfig\all post data" (with the spaces) is this right??
One of the previous settings I tried earlier on was this thread - https://broadband.forum/bsnl-broadband/20795-need-help-connecting-bsnl-modem-belkin-router/2/
"I have a Belkin ADSL modem with Wireless G-Router model F5D7632-4
In the setup connection choose PPoe
IP add 192.168.2.100
Subnet mask 255.255.255.0
Default gateway 192.168.2.1
VPI / VLC 0/35"
But this person says to use PPPoE, and as far as I know, im not using an ethernet cable anywhere. this belkin is a MODEM ROUTER, so it has inbuilt modem and is just one device, NOT 2 separate ones. and this is connected to my laptop via a USB network adapter (my laptop doesnt have inbuilt wifi)
I am posting a screen shot of the 'main status page' of belkin. it says "internet status: connected" however when I go to any websites it never loads and nothing is opening at all. also, the DNS address is all 0's?? (i've set it to get automatically from ISP)
http://i169.photobucket.com/albums/u210/ketan30/WiFi.jpg
also, when i choose my connection type as PPPoE or PPPoA, the internet status always remains as Not connected, hence ive chosen "Dynamic/Fixed IP (1483 Bridged)" which at least SHOWS it as connected! btw, the other 2 "connection types" are STATIC IP - IPoA and MODEM ONLY - DISABLE INTERNET SHARING.
If you require any other screen shots then please let me know.
oh and one more thing, at present ive entered the above details (IP, subnet mask etc).
THANKS!
The cmd thing that you told me to type didnt give any results. Just to confirm, I typed "ipconfig\all post data" (with the spaces) is this right??
One of the previous settings I tried earlier on was this thread - https://broadband.forum/bsnl-broadband/20795-need-help-connecting-bsnl-modem-belkin-router/2/
"I have a Belkin ADSL modem with Wireless G-Router model F5D7632-4
In the setup connection choose PPoe
IP add 192.168.2.100
Subnet mask 255.255.255.0
Default gateway 192.168.2.1
VPI / VLC 0/35"
But this person says to use PPPoE, and as far as I know, im not using an ethernet cable anywhere. this belkin is a MODEM ROUTER, so it has inbuilt modem and is just one device, NOT 2 separate ones. and this is connected to my laptop via a USB network adapter (my laptop doesnt have inbuilt wifi)
I am posting a screen shot of the 'main status page' of belkin. it says "internet status: connected" however when I go to any websites it never loads and nothing is opening at all. also, the DNS address is all 0's?? (i've set it to get automatically from ISP)
http://i169.photobucket.com/albums/u210/ketan30/WiFi.jpg
also, when i choose my connection type as PPPoE or PPPoA, the internet status always remains as Not connected, hence ive chosen "Dynamic/Fixed IP (1483 Bridged)" which at least SHOWS it as connected! btw, the other 2 "connection types" are STATIC IP - IPoA and MODEM ONLY - DISABLE INTERNET SHARING.
If you require any other screen shots then please let me know.
oh and one more thing, at present ive entered the above details (IP, subnet mask etc).
THANKS!
Start run cmd type ipconfig /all
post data.
======================================================================EXAMPLE:
FOR MY SET UP ON WIFI FOR LAPTOP
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\essbebe> ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : starnote
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Wireless Network Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wireless Notebook Adapter
MN-720 #2
Physical Address. . . . . . . . . : 00-0D-3A-xx-Ay-z4
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.2.2 (*laptop)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.2.1
DHCP Server . . . . . . . . . . . : 192.168.2.1
DNS Servers . . . . . . . . . . . : 208.67.220.220
208.67.222.222
Lease Obtained. . . . . . . . . . : Thursday, April 02, 2009 11:11:16 PM
Lease Expires . . . . . . . . . . : Friday, April 03, 2009 11:11:16 PM
C:\Documents and Settings\essbebe>_
Para two:
This article assumes that you have a dynamic internet connection.
First make sure that you have a valid connection to the router and that you have a valid IP address.
(note:
We recommend you use a computer that has a wired connection to the router.
With a wired connection you should have a link light on the numbered port of the router to which your computer is connected.
Second, you should have an IP address in the range 192.168.2.x.
To check your IP address,
click on Start, Run and type in \"command\".
Click OK. Now type in \"ipconfig\" and hit enter.
Your IP address will be listed.)
1. Unplug the power cable from the modem.
2. Open a Web Browser
3. In the address bar type http://192.168.2.1
4. Click on Connection Type in the left hand column under Internet WAN heading
5. Enter your password if any and click Submit
6. Click on Dynamic and then click on Next
7. Type in your Hostname if required.
8. Click on Apply Changes
9. Plug the power cable back into the cable (*?) modem.
10. Click on the Home link at the top of the screen
11. It should now show Connected under the Internet Status column
REF:
https://broadband.forum/bsnl-broadband/20795-need-help-connecting-bsnl-modem-belkin-router/#post145627 post no 12.
Para THREE : (A) DO YOU HAVE A telephone line based Broadband
Connection ? wHAT IS the tariff plan ?
confirm.
(QUERIES:B)as far as I know, im not using an ethernet cable anywhere. this Belkin is a MODEM ROUTER, so it has inbuilt modem and is just one device, NOT 2 separate ones. and this is connected to my laptop via a USB network adapter (my laptop doesnt have inbuilt wifi)
YOUR SET UP:
NO CABLE ( called RJ45 or telephone cable RJ11 used )
1."USB network adaptor" What are the technical details ?
2. BELKINS modem+wifi router
3. Laptop ( No wireless card )
Show connections.
usual standard connections
4.BSNL PHONE LINE == RJ11==ADSL splitter LINE
ADSL SPLITTER : MODEM PORT rj11===>> to adsl Modem ( Belkins ???)
ADSL Splitter : PHONE PORT Rj11=== >> ALL PHONES
ADSL modem === Ethernet PORT ===RJ45 cable== ethernet port of laptop
or no connection .
If modem+wifirouter
wifi to laptop. ( with wireless LAN adaptor)
Feedback.
More LATER.
Hi thanks for the detailed reply.
This is what I get with the cmd>ipconfig/all thing --->
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\a>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : tn
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : Belkin
Ethernet adapter Broadband Modem:
Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : VIA Rhine III Fast Ethernet Adapter
Physical Address. . . . . . . . . : 00-15-E9-A5-70-F7
Ethernet adapter Wireless Network Connection:
Connection-specific DNS Suffix . : Belkin
Description . . . . . . . . . . . : Belkin Wireless G USB Network Adapter
Physical Address. . . . . . . . . : 00-17-3F-8E-E5-2B
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.2.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.2.1
DHCP Server . . . . . . . . . . . : 192.168.2.1
DNS Servers . . . . . . . . . . . : 192.168.2.1
Lease Obtained. . . . . . . . . . : Friday, April 03, 2009 2:48:42 PM
Lease Expires . . . . . . . . . . : Tuesday, January 19, 2038 8:44:07 AM
C:\Documents and Settings\a
Regarding plan, from today I have got the home UL 750 Plus plan.
"DO YOU HAVE A telephone line based Broadband?" I think the answer top that would be YES. In my Belkin modem router, there are only 2 wires going in. 1. Power wire. 2. An RJ-11 wire which is coming from a phone line in the wall, pretty standard right? I dont have any RJ-45 wires (aka ethernet cables), only the 2 mentioned.
Regarding the USB Network adapter - it is a Belkin F5D7050 (http://ecx.images-amazon.com/images/I/31C49ATBX5L.jpg). This plugs in my laptop (and also desktop) and allows me to use wifi since neither of my laptop and desktop have internal wifi support.
Also, the phone line that I am using does not have a phone connected to it, ie. its a different room, so I have not used a splitter as i didnt feel the need to do so, and is it is anyway, my wired modem works fine from the same phone line which i keep on swapping into belkin to make it work!!
Any other screenshots/photos/data required then please let me know!
Thanks 😀
---------- Post added at 03:17 PM ---------- Previous post was at 03:14 PM ----------
Oh and if its any help, this is what I get when I enter the ipconfig thing with my wired modem that I am using at present --->
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\a>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : tn
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Broadband Modem:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VIA Rhine III Fast Ethernet Adapter
Physical Address. . . . . . . . . : 00-15-E9-A5-70-F7
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
PPP adapter DataOne:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
Physical Address. . . . . . . . . : 00-53-45-00-00-00
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 59.94.106.15
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 59.94.106.15
DNS Servers . . . . . . . . . . . : 218.248.240.79
218.248.240.181
NetBIOS over Tcpip. . . . . . . . : Disabled
C:\Documents and Settings\a>
This is what I get with the cmd>ipconfig/all thing --->
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\a>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : tn
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : Belkin
Ethernet adapter Broadband Modem:
Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : VIA Rhine III Fast Ethernet Adapter
Physical Address. . . . . . . . . : 00-15-E9-A5-70-F7
Ethernet adapter Wireless Network Connection:
Connection-specific DNS Suffix . : Belkin
Description . . . . . . . . . . . : Belkin Wireless G USB Network Adapter
Physical Address. . . . . . . . . : 00-17-3F-8E-E5-2B
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.2.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.2.1
DHCP Server . . . . . . . . . . . : 192.168.2.1
DNS Servers . . . . . . . . . . . : 192.168.2.1
Lease Obtained. . . . . . . . . . : Friday, April 03, 2009 2:48:42 PM
Lease Expires . . . . . . . . . . : Tuesday, January 19, 2038 8:44:07 AM
C:\Documents and Settings\a
Regarding plan, from today I have got the home UL 750 Plus plan.
"DO YOU HAVE A telephone line based Broadband?" I think the answer top that would be YES. In my Belkin modem router, there are only 2 wires going in. 1. Power wire. 2. An RJ-11 wire which is coming from a phone line in the wall, pretty standard right? I dont have any RJ-45 wires (aka ethernet cables), only the 2 mentioned.
Regarding the USB Network adapter - it is a Belkin F5D7050 (http://ecx.images-amazon.com/images/I/31C49ATBX5L.jpg). This plugs in my laptop (and also desktop) and allows me to use wifi since neither of my laptop and desktop have internal wifi support.
Also, the phone line that I am using does not have a phone connected to it, ie. its a different room, so I have not used a splitter as i didnt feel the need to do so, and is it is anyway, my wired modem works fine from the same phone line which i keep on swapping into belkin to make it work!!
Any other screenshots/photos/data required then please let me know!
Thanks 😀
---------- Post added at 03:17 PM ---------- Previous post was at 03:14 PM ----------
Oh and if its any help, this is what I get when I enter the ipconfig thing with my wired modem that I am using at present --->
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\a>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : tn
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Broadband Modem:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VIA Rhine III Fast Ethernet Adapter
Physical Address. . . . . . . . . : 00-15-E9-A5-70-F7
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
PPP adapter DataOne:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
Physical Address. . . . . . . . . : 00-53-45-00-00-00
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 59.94.106.15
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 59.94.106.15
DNS Servers . . . . . . . . . . . : 218.248.240.79
218.248.240.181
NetBIOS over Tcpip. . . . . . . . : Disabled
C:\Documents and Settings\a>
superprash2003
Regulars
so you dont mind using pppoe mode or bridged mode?? your bridged mode seems to work...
superprash2003
Regulars
your ipconfig output shows that you are getting an ip 59.94.x.x via bridged mode.. which means you are using a dialer.. You still cannot access the interneT?? try opening 74.125.45.100 in the browser
Hi superprashsorry if i confused you a bit, the second ipconfig data given is of my usual standard wired miodem that i am using at present. and hence as that works the ip address is shown as 59.94.x.x BUT the first ipconfig data is of my wireless which is not working and that does not show the ip address in that format.
superprash2003
Regulars
Right now I havce factory resetted my modem router and i am starting from scratch taking screenshots of every step for u to have a look and see where I might be going wrong.
Welcome starting screen: http://i169.photobucket.com/albums/u210/ketan30/1stscreen.jpg
Country and ISP (this was bought from UK hence that is shown first, but I select "other"): http://i169.photobucket.com/albums/u210/ketan30/2ndscreen.jpg
http://i169.photobucket.com/albums/u210/ketan30/3rd.jpg
I select "other ISP" and then get asked what connection type. I choose dynamic (?): http://i169.photobucket.com/albums/u210/ketan30/3rd.jpg
Please notice that when i choose dynamic, the option to enter username and password are not available anymore.. strange!: http://i169.photobucket.com/albums/u210/ketan30/5.jpg
http://i169.photobucket.com/albums/u210/ketan30/6.jpg
Summary screen: http://i169.photobucket.com/albums/u210/ketan30/7.jpg
Saving the settings, during which the modem router restarts: http://i169.photobucket.com/albums/u210/ketan30/8.jpg
Home screen - internet status shows no connection (in red upper right hand): http://i169.photobucket.com/albums/u210/ketan30/9.jpg
I try and open Google with the code that Superprash given me (i also spell it out to confirm) and it does not open: http://i169.photobucket.com/albums/u210/ketan30/10.jpg
So to change these settings, I go on connection type and the available options listed are same as before. I choose PPPoA: http://i169.photobucket.com/albums/u210/ketan30/11.jpg
With this connection type I at lease get the option to enter my username and password: http://i169.photobucket.com/albums/u210/ketan30/12.jpg
I apply these and save once again, it restarts: http://i169.photobucket.com/albums/u210/ketan30/13.jpg
But still no luck, neither does google etc open: http://i169.photobucket.com/albums/u210/ketan30/14.jpg
What should I do??!:huh:
Welcome starting screen: http://i169.photobucket.com/albums/u210/ketan30/1stscreen.jpg
Country and ISP (this was bought from UK hence that is shown first, but I select "other"): http://i169.photobucket.com/albums/u210/ketan30/2ndscreen.jpg
http://i169.photobucket.com/albums/u210/ketan30/3rd.jpg
I select "other ISP" and then get asked what connection type. I choose dynamic (?): http://i169.photobucket.com/albums/u210/ketan30/3rd.jpg
Please notice that when i choose dynamic, the option to enter username and password are not available anymore.. strange!: http://i169.photobucket.com/albums/u210/ketan30/5.jpg
http://i169.photobucket.com/albums/u210/ketan30/6.jpg
Summary screen: http://i169.photobucket.com/albums/u210/ketan30/7.jpg
Saving the settings, during which the modem router restarts: http://i169.photobucket.com/albums/u210/ketan30/8.jpg
Home screen - internet status shows no connection (in red upper right hand): http://i169.photobucket.com/albums/u210/ketan30/9.jpg
I try and open Google with the code that Superprash given me (i also spell it out to confirm) and it does not open: http://i169.photobucket.com/albums/u210/ketan30/10.jpg
So to change these settings, I go on connection type and the available options listed are same as before. I choose PPPoA: http://i169.photobucket.com/albums/u210/ketan30/11.jpg
With this connection type I at lease get the option to enter my username and password: http://i169.photobucket.com/albums/u210/ketan30/12.jpg
I apply these and save once again, it restarts: http://i169.photobucket.com/albums/u210/ketan30/13.jpg
But still no luck, neither does google etc open: http://i169.photobucket.com/albums/u210/ketan30/14.jpg
What should I do??!:huh:
My post is not showing up!!
---------- Post added at 03:32 PM ---------- Previous post was at 03:31 PM ----------
Right now I havce factory resetted my modem router and i am starting from scratch taking screenshots of every step for u to have a look and see where I might be going wrong.
Welcome starting screen: http://i169.photobucket.com/albums/u210/ketan30/1stscreen.jpg
Country and ISP (this was bought from UK hence that is shown first, but I select "other"): http://i169.photobucket.com/albums/u210/ketan30/2ndscreen.jpg
http://i169.photobucket.com/albums/u210/ketan30/3rd.jpg
I select "other ISP" and then get asked what connection type. I choose dynamic (?): http://i169.photobucket.com/albums/u210/ketan30/4th.jpg
Please notice that when i choose dynamic, the option to enter username and password are not available anymore.. strange!: http://i169.photobucket.com/albums/u210/ketan30/5.jpg
http://i169.photobucket.com/albums/u210/ketan30/6.jpg
Summary screen: http://i169.photobucket.com/albums/u210/ketan30/7.jpg
Saving the settings, during which the modem router restarts: http://i169.photobucket.com/albums/u210/ketan30/8.jpg
Home screen - internet status shows no connection (in red upper right hand): http://i169.photobucket.com/albums/u210/ketan30/9.jpg
I try and open Google with the code that Superprash given me (i also spell it out to confirm) and it does not open: http://i169.photobucket.com/albums/u210/ketan30/10.jpg
So to change these settings, I go on connection type and the available options listed are same as before. I choose PPPoA: http://i169.photobucket.com/albums/u210/ketan30/11.jpg
With this connection type I at least get the option to enter my username and password: http://i169.photobucket.com/albums/u210/ketan30/12.jpg
I apply these and save once again, it restarts: http://i169.photobucket.com/albums/u210/ketan30/13.jpg
But still no luck, neither does google etc open: http://i169.photobucket.com/albums/u210/ketan30/14.jpg
What should I do??!!:huh:
---------- Post added at 03:32 PM ---------- Previous post was at 03:31 PM ----------
Right now I havce factory resetted my modem router and i am starting from scratch taking screenshots of every step for u to have a look and see where I might be going wrong.
Welcome starting screen: http://i169.photobucket.com/albums/u210/ketan30/1stscreen.jpg
Country and ISP (this was bought from UK hence that is shown first, but I select "other"): http://i169.photobucket.com/albums/u210/ketan30/2ndscreen.jpg
http://i169.photobucket.com/albums/u210/ketan30/3rd.jpg
I select "other ISP" and then get asked what connection type. I choose dynamic (?): http://i169.photobucket.com/albums/u210/ketan30/4th.jpg
Please notice that when i choose dynamic, the option to enter username and password are not available anymore.. strange!: http://i169.photobucket.com/albums/u210/ketan30/5.jpg
http://i169.photobucket.com/albums/u210/ketan30/6.jpg
Summary screen: http://i169.photobucket.com/albums/u210/ketan30/7.jpg
Saving the settings, during which the modem router restarts: http://i169.photobucket.com/albums/u210/ketan30/8.jpg
Home screen - internet status shows no connection (in red upper right hand): http://i169.photobucket.com/albums/u210/ketan30/9.jpg
I try and open Google with the code that Superprash given me (i also spell it out to confirm) and it does not open: http://i169.photobucket.com/albums/u210/ketan30/10.jpg
So to change these settings, I go on connection type and the available options listed are same as before. I choose PPPoA: http://i169.photobucket.com/albums/u210/ketan30/11.jpg
With this connection type I at least get the option to enter my username and password: http://i169.photobucket.com/albums/u210/ketan30/12.jpg
I apply these and save once again, it restarts: http://i169.photobucket.com/albums/u210/ketan30/13.jpg
But still no luck, neither does google etc open: http://i169.photobucket.com/albums/u210/ketan30/14.jpg
What should I do??!!:huh: