Airtel modem on BSNL Broadband

  • Thread starter Thread starter pradeep4x4
  • Start date Start date
  • Replies Replies 27
  • Views Views 13,725
P

pradeep4x4

Newbie
Messages
21
Location
NA
ISP
BSNL - DataOne
Hi Team, This is pradeep and I wish to know from your experst that , how to make use of the Airtel Broadband modem, which says Web Distributor II, YOZAN secured Wireless, imported by BHARTI TELETECH LTD.Right now I am using BSNL Dataone 256 Unlimited connection along with the native Sterlite DataOne SmartAX MT882 ADSL (Huawei) Modem, it is found to be dead and was taken away by my friend for research. On the other hand I have an ADSL modem supplied by the Airtel Broadband, which do have the same port or connection as that of the DataOne ( LINK, LAN, DC IN, ON/OFF), I tried connection using this Airtel modem, but I failed to do so.Any Experts and Guru's Pls tell me how to make use of this Airtel modem to connect to Dataone connection. Pls do tell me what to be done and what could be the reason that the airtel modem failed to connect to Dataone connection.Thanks for all the help..!
 
man u need to reset the modem once... restore to factory setting .... once post the screenshots of Adsl setting once ....
 
Airtel uses 1/35 for VPI/VCI settings. You need to change that to 0/35 for BSNL. This is the only change in adsl settings + you need to enter the BSNL username and password.
 
well today only i changed from airtel to BSNL H 1350+.y i can able to open microsoft.com, etc :huh:
 
man u need to reset the modem once... restore to factory setting .... once post the screenshots of Adsl setting once ....

Thanks Kanishka, I tried to reset using the reset button on the modem, nogo still striving to make it work. I dint change any settings rather I dont know how to. Sorry, where can I find the Adsl settings so as to post the screenshot.

Airtel uses 1/35 for VPI/VCI settings. You need to change that to 0/35 for BSNL. This is the only change in adsl settings + you need to enter the BSNL username and password.

Thanks Ajay, Hope it will work if I change the settings as you said. However, I am affraid that I dont know how to change the settings, any help on this Ajay. I am using the same BSNL Username and Password. Nothing has been changed just the modem alone. I dint use Airtel connection at all in this PC, so I believe VPI settings are not set to 1/35.

well today only i changed from airtel to BSNL H 1350+.

y i can able to open microsoft.com, etc :huh:

Thanks for the info Baba009, are you using the Airtel modem to that of BSNL connection, if so what all you did to make it work.
 
It is quite possible.
 

Thanks for the info Baba009, are you using the Airtel modem to that of BSNL connection, if so what all you did to make it work.

u need to reset your modem. then make new connection in ur modem settings with ur account number,etc :thumbsup:
 
VPI VCI for BSNL Is 0 and 35 change to this
IF DNS is assigned automatically no change.
If dialer mode No change Use BSNL ID PW
If "Always On " change User ID IN WAN page and PW.
( ID without @ bsnl.in )
Since the modem likely to be 220 BX
Follow ut330r2u (new ) settings from calcutta telephones web site.
UT-300R2U ADSL MODEM MENU
or see this link
Chennai Telephones- Changing password in DataOne Pre-configured modem
using 110BX1 for bsnl for AIRTEL & BSNL now. .also . used 220BX for one year .
 
Thanks kanishka and essbebe, I made use of your links and advices and found that I cant get to 192.168.1.1 screen, all I have is Page Cannot Displayed. So, there is no option to change VPI \ VCI. However, I borrowed a type-1 modem from a friend and tried to change the setting too but nogo, I can go online using the type1 modem, but I cant get to the 192.168...screen. Any more thoughts pls let me, I wish to go online using Airtel modem. Thanks.
 
Hi Team,

I have an update on this, if type1 modem is used, then I dont have the modem configuration settings screen, in a way if the type3 modem is used then I can have the modem configuration screen using http://192.168.1.1/phtml/pMain.html. This is how I can change the settings.

In the same way if the Airtel modem is used ? I just have "Page cannot Displayed"..So, there is no way to change the VCI settings using Airtel modem. Still beating round the bush . . . . Pls team Help me how to make use of Yozan airtel modem to BSNL dataone connection. Steps to resolve please.


try this:
say 117.xx.xx.xx
Now type it in your IE address bar
Do you get a window opening the modem ?

Mention model and make of AIRTEL modem.

Thanks for the reply.

?Using IP page cannot dispay, but as I said above its working with type3 modem but not with type1 and Airtel modem.

Airtel Modem is of: Airtel Broadband ADSL modem, which says Web Distributor II, YOZAN secured Wireless, imported by BHARTI TELETECH LTD. Whcih has LINK, LAN, DC IN, ON/OFF.
 
Web Distributor II, YOZAN secured Wireless

1.Please mention type 1 modem make/model/manufacturer.
It can be anything.
Type I , II, III ,IV listing is used ONLY by BSNL
and
BSNL BROADBAND MAIN MENU

all modems have some NAME like us!

From what you reported it could be Huawei AX mt882 modem.

2. If you are connected to Internet with any Modem dis connect it.
Connect Airtel
Web Distributor II, YOZAN secured Wireless
Connect it to computer.

You can power"ON" the "YOZNAN" and press the reset switch
( Usually in the back) for about 20 or 30 seconds, to restore
the modem to factory settings.
IP can be 192.168.1.1
user ID admin Password admin or password.

4. Start Network LAN
Properties
TCP/IP
Properties
type
obtain IP address automatically.
Apply Save.

5. Now Start RUN type cmd
type ipconfig /all
You should get
192.168.1.X ( If you get 169.xx.xx.xx see below 6 )
255.255.255. 0
192.168.x.x ====>>> Now this is the gateway for Yoznan.

6. In Same IP page
type 192.168.1.10
255.255.255.0
192.168.1.1
Apply SAVE.

Feedback.
 
Thanks again, essbebe.

I Just saw it as soon as you posted it. However, essbebe you got it right the BSNL type1 is of Huawei AX MT882, Type3 is of MT841.

2-3. I did exactly what you said in step-2, perfect it did worked out, I see Web Distributor Conf page, It just came up with out prompting for the User Id and Password.

4. Its all done and is already set to obtain IP address automatically.

5. I have this Ipconfig screen.

http://img242.imageshack.us/my.php?image=ipconfigairtel.jpg

essbebe, I am on the track now, hopping I am not soo further to go online. With your help I can achieve this. For your convience I am posting some screen shots from the config screen.

http://img242.imageshack.us/my.php?image=quickstart.jpg

http://img242.imageshack.us/my.php?image=status1w.jpg

http://img242.imageshack.us/my.php?image=status2f.jpg

http://img242.imageshack.us/my.php?image=systemtree.jpg

http://img242.imageshack.us/my.php?image=lanconn.jpg

http://img242.imageshack.us/my.php?image=wanconn.jpg

I performed Restart option by pressing the Restart button under the System tree.

I just dont know what to do next, its like Greek and Latin to me, pls tell me what all the setting and changes to be made or done to this to make it work...Pls do post me the steps and tell me what esle you need.

Edited this to update more screen shots:

http://img81.imageshack.us/my.php?image=ipconfigairtel.jpg

http://img81.imageshack.us/my.php?image=createawanconnection.jpg

http://img81.imageshack.us/my.php?image=wanconcreatingerror1.jpg

http://img81.imageshack.us/my.php?image=pppoeroutedconfig.jpg

http://img81.imageshack.us/my.php?image=pppoefailure.png


Thanks a ton.
 
Web Distributor II, YOZAN secured Wireless

http://img81.imageshack.us/img81/5039/pppoefailure.th.png
http://img242.imageshack.us/img242/2349/quickstart.jpg
quick start
click PPPoE login
Apply next page.
http://img81.imageshack.us/img81/5232/createawanconnection.jpg
http://img81.imageshack.us/img81/5273/pppoeroutedconfig.jpg

PPPoE auto connect enabled
Click enable NAT on this interface.
wan Ip address Leave blank
select AUTO or CHAP
Type user Name abcd without @ bsnl.in
Password : as given to you



http://img242.imageshack.us/img242/1024/lanconn.jpg
OK click APPLY

http://img242.imageshack.us/img242/8546/systemtree.jpg
UNcheck mark against factory settings
RESTART


Save reboot. wait for two minutes.

If still problem

Feedback. with error messages.
Post :
Status screen shot. and error log page. screen shot
 

Similar threads

R
can BSNL Bharath Fiber Broadband be hacked through lan connection? If yes, how it can be made secured
Replies
6
Views
970
vishalrao
rajujayaraman
Hi, I am new to bsnl fibre broadband...does this give dynamic ip to device
Replies
12
Views
930
Sushubh
Y
BSNL FTTH Syrotech bridge mode - working configuration
2
Replies
28
Views
4,872
!!..PD..!!
nitinsau
Pfsense with bsnl fiber broadband
Replies
7
Views
1,365
shashankb
Top