815 BSNL Misery

  • Thread starter Thread starter dOne
  • Start date Start date
  • Replies Replies 6
  • Views Views 1,651
D

dOne

Curious
Messages
305
Location
NA
ISP
BSNL 500 Combo
I have been facing 815 error on my BSNL broadband from last 25 days.I have tried with PPPoE mode, but its PPPoE link is OFF, while ADSL link is stable (though at very beginning it takes time to be Stable). I have also checked by DSN settings and they are perfect (as per BSNL customer care).I even carried my laptop and modem (D-Link GLB-502T) to BSNL office and it was working fine there in PPPoE mode (in bridge mode, it was not able to connect there also). I cannot understand where might be problem, because:1. Same machine and modem working in BSNL office.2. ADSL link is stable at home, so difficult to blame telephone line.Any help out there??
 
D
h t t p://www.D-Link.co.in/GLB502T_Guide_modified/index.htm

Did you enter your UserName without @bsnl.in? for "always On"

Try creating a new dialer deleting the old one.
Post
Start run type cmd type ipconfig /all
 
ADSL link is ON and stable.

Following is System Log from my D-Link GLB 502T modem.:

Bridge Interface Added: eth0
Bridge Interface Added: usb0
DSL Carrier is down
del_iptable_rules : ppp_name not intact
DSL Carrier is up
auto_vcc_default oamPing(0.35)result(2)
auto_vcc_default oamPing(0.32)result(2)
auto_vcc_default oamPing(0.40)result(2)
auto_vcc_default oamPing(0.36)result(2)
auto_vcc_default oamPing(0.38)result(2)
auto_vcc_default oamPing(0.96)result(2)
auto_vcc_search oamPing(0.35)result(2)
auto_vcc_search oamPing(8.35)result(2)
auto_vcc_search oamPing(0.43)result(2)
auto_vcc_search oamPing(0.51)result(2)
auto_vcc_search oamPing(0.59)result(2)
auto_vcc_search oamPing(8.43)result(2)
auto_vcc_search oamPing(8.51)result(2)
auto_vcc_search oamPing(8.59)result(2)
Conn Delay Timer started for 50 sec
pppd 2.4.1 started by root, uid 0
TimerEvent: PPPoE not in a state to handle it; currState 3.
PPPoE Apply Transaction
PPPoE Current State = 3
PPPoE Apple Code = 2
PPPoE ReStart Flag = 0
PPPoE Relaunch = 0
PPPoE AFTER Apply Transaction
PPPoE Current State = 3
PPPoE Apple Code = 0
PPPoE ReStart Flag = 0
PPPoE Relaunch = 0
 
are you able to login to the portal?from another connection obv.. if possible check from your friends/relatives pc
 

And Finally problem got solved. :thumb:
They (BSNL) told me that there was problem with Port for me in exchange, so now they have assigned new Port and I'm able to connect broadband in PPPoE mode. Though I'm not able to connect in Bridge mode and still getting 815 error. But atleast I'm able to browse!!!!

----------
 

Top