DSL-2730U DLink Router configuration for MTS 24Online Connection

[Kaushik DB]

I have a connection from a local ISP which uses MTS connection, it uses 24Online billing system and provided me a RJ45 Cable with static IP, subnet mask, default gateway and primary dns ip, username and password.
I have a
DSL-2730U Wireless N 150 ADSL2+ 4-Port Router - D-Link
I want to have wifi in my house using this connection.
Now when i just put the uplink RJ45 to lan1 and another cable to connect my pc and the router on lan2 of the router, i can browse the internet from my pc but can't browse it from the wifi.
I'm a noob on networking and searched through the forum and google but still can't find any solution. If someone could enlighten me on this, that would be appreciated. Thank you.

 

[AmitT]

Kaushik, this is happening because you have an ADSL router. The router will work like a network hub for lan connections but the wifi only gets picked up from the ADSL connection.
IMO you will need a separate Wifi router to share your internet connection. Since you seem to like D-Link, try http://www.dlink.co.in/products/?pid=544
This one is fairly cheap. I purchased one from Hathway which goes with my internet connection (Docsis 3.0) and they sold it to me for Rs 1,000 - so it is not very expensive either. It's available on Flipkart for a Rs 100 more. See https://www.flipkart.com/d-link-dir-600l-wireless-n150-cloud-router/p/itmdbemyeh7t8rkt?pid=RTRDBECHNDFNCM3H&cmpid=content_router_8965229628_gmc_pla&tgi=sem,1,G,9226359,g,search,,25683448820,1o2,,,c,,,,,,,&gclid=CKDpr8HDtrsCFYmN3godX14AMw

 

[Kaushik DB]

AmitT, in my hostel I have used wifi with this router. The difference is there's no static ip configuration for the pc, i just plug the RJ45 in and i can use internet both via Lan and WiFi.