MTNL Modem TKD with Belkin Router

Praful

Newbie
[OP]
Feb 21, 2012
16
0
Hi Guys,I am new to this ...Here is my problemI have MTNL Modem TKD 318Belkin Wireless Router F9K1102Not able to connect to internet if i am using my router. Frequent drop outs occurs.I called the belkin support they said its a problem of NAT.I called MTNL support (No knowledge at all for settings without NAT)When i check the modem site (192.168.1.1) in the Status i can see the public IP address ( 59.182.101.2)When i check it on my PC the IP address is different like 192.168.1.5I tried to configure my modem by disabling NAT option in WAN settings (Failed to access the internet)I want to configure my MTNL modem so that i can get the public IP address to my desktopThis is really getting on my nerves ... i have called MTNL Support a lot many times no use....Guys please help ... Thanks in advance...
 
K

kreacher10

In what way will 'get the public IP address to my desktop' help you? Can you post your stats which could indicate the nature of your problem (disconnections)[/FONT]
 

Praful

Newbie
[OP]
Feb 21, 2012
16
0
When i called belkin support ..they asked me to get an Public IP address from MTNL to my desktop.Since my router and modem both are having NAT enabled. ... i could not access internet ...Let me know if you want any specific details ...thanks in advance
 


Praful

Newbie
[OP]
Feb 21, 2012
16
0
@xyx2000 : kindly help me with Bridge mode settings...if you could send me some links of docs ...@socrates: dint get you ....dunno what is SNR margin and Attenuation numbers
 


Praful

Newbie
[OP]
Feb 21, 2012
16
0
XYX : please let me know how to configure modem in bridge mode ...socrates: dunno what you are asking for ... :(
 

xyx2000

Regulars
Regulars
Oct 21, 2005
2,667
316
you can configure bridge mode under wan , you have to choose between bridge & pppoe, choose bridge

----------

You could have used the SEARCH option... A tutorial for the same is already posted here....
http://broadbandforum.in/mtnl-broadband/49401-t-kd-318eui-ut300r2u-shift/

In this tutorial you have to only do the 1st 4 steps dont do the windows configuration, now you have to configure your belkin router in pppoe mode & type your mtnl user / pass in the belkin router