Using wireless router as an access point?

goyal.sanchit

Regular
[OP]
Regulars
May 10, 2011
137
2
Hello everyoneCurrently I am using beetel 450bx 1 router in 1 room to connect to bsnl broadband. I have a lan wire connecting 2 rooms and want to use another router as an access point in the second room to get wifi signal in the 2nd room as well. Which router would be good for that which is easy to configure as well as an access point. I would not like to spend more than about 1500 rs but can spend more if the quality is very good.Regards
 

essbebe

MODERATOR
Regulars
Aug 20, 2006
9,804
81
What is the distance involved ? Say radius of wifi working ( 20 feet 30 feet ?expected?)Are the rooms in different floors ? 1.By keeping the Beetel450BXI at a higher plane, and keeping the unit's antenna parallel to the ground rotate it for max signal at the farthest end ( Room 2)2.If Room 2 is at a higher height ( say 2nd floor) consider connecting wifi routerto Phone jack ( via ADSl splitter).3.If the Antenna is removable consider replacing with a higher gain 5dBi antenna( cost Rs 400 to rs 500 approx )4. If some signal is picked up in wifi mode another identical Beetel450BXI can be considered for wifi mode in WDS mode ( Check wireless menu pages ). No cable connection.Approx cost Rs 2000/= ( or a stand alone wifi router with WDS say Rs 1500/=)5.In Room 1 Laptop1 download and install application "Connectify".Check signalSSID is picked up in room No 2.Laptop1 can be repositioned in room No 1.( connected to phone line )Feedback. item wise only.
 

goyal.sanchit

Regular
[OP]
Regulars
May 10, 2011
137
2
What is the distance involved ? Say radius of wifi working ( 20 feet 30 feet ?expected?)
Are the rooms in different floors ?
1.
By keeping the Beetel450BXI at a higher plane, and keeping the unit's antenna
parallel to the ground rotate it for max signal at the farthest end ( Room 2)
2.
If Room 2 is at a higher height ( say 2nd floor) consider connecting wifi router
to Phone jack ( via ADSl splitter).
3.
If the Antenna is removable consider replacing with a higher gain 5dBi antenna
( cost Rs 400 to rs 500 approx )
4.
If some signal is picked up in wifi mode another identical Beetel450BXI can be considered
for wifi mode in WDS mode ( Check wireless menu pages ). No cable connection.
Approx cost Rs 2000/= ( or a stand alone wifi router with WDS say Rs 1500/=)
5.
In Room 1 Laptop1 download and install application "Connectify".
Check signalSSID is picked up in room No 2.
Laptop1 can be repositioned in room No 1.( connected to phone line )

Feedback. item wise only.


The rooms are on different floors.




1.) Method one doesnt improve much signal. I have also tried using a can as a parabolic antenna.


2.) The main broadband and landline connection is coming at 1st floor. The main line is already connected to a splitter which then goes to the modem and the phone line back to other rooms. Other than that I didnt get what you mentioned :-?




3.) I was hoping another router as a WAP would be easier solution and it could be used standalone as a router also later.


4.) The signal is almost non existent. I already have a lan wire between 2 rooms. Wont it be better if some router can be connected via lan and configured as access point only? How easy or difficult would that be?




5.) Laptop has to be used at different places.




Regards
 


x720

Incoherent Poster
Regulars
Aug 14, 2011
10,440
1,527
Gurgaon | Mumbai
His op does mention him wanting to buy another router, hence I had suggested the option of repeater :)EditI see the signal is non existent, so wds won't work. Ill read through his post again and post a suggestion
 


x720

Incoherent Poster
Regulars
Aug 14, 2011
10,440
1,527
Gurgaon | Mumbai
Now I get it.Lets label the two rooms, room 1 and room 2.Room 1Adsl source, phone line from splitter provides telephone to the entire house.Now, you've got the beetel in room1, and you say you've got a LAN wire connecting the two rooms. Assuming both rooms have LAN wire (rj45) sockets, you can plug a LAN wire into the beetel and the other end into the socket in room one. Now go to room 2, plug a LAN wire(wire2) into its socket. And plug the other end of wire2 into the wan port of your new router(a standalone wifi router is enough) , you've now setup the router in room 2 also.Alternatively, the telephone wire coming out from the splitter (meant for the modem) could be split into two(using a normal line distributer) one part would go into the beetel, and the other to room 2 modem, you'd need a new modem for this arrangement as we are using telephone wires here. Another option is by distributing the line via the power line, I'll elaborate on this one if you're interest ed.
 

goyal.sanchit

Regular
[OP]
Regulars
May 10, 2011
137
2
Now, you've got the beetel in room1, and you say you've got a LAN wire connecting the two rooms. Assuming both rooms have LAN wire (rj45) sockets, you can plug a LAN wire into the beetel and the other end into the socket in room one. Now go to room 2, plug a LAN wire(wire2) into its socket. And plug the other end of wire2 into the wan port of your new router(a standalone wifi router is enough) , you've now setup the router in room 2 also.

This option looks to be most feasible since I already have a LAN connection in the 2 rooms. So I plug one end of the lan wire into any lan port in beetel and the other end into the wan port in any other router and it is set up? No need to modify settings in the 2nd router?


Also can you suggest some good routers in the 1500-2000rs price range?

Thanks
 

x720

Incoherent Poster
Regulars
Aug 14, 2011
10,440
1,527
Gurgaon | Mumbai

goyal.sanchit

Regular
[OP]
Regulars
May 10, 2011
137
2
Well it would be good to get the signal at other places as well and I am hoping that since even the beetel did a good job a wireless N router should be better than that. And if I buy 1 with 2 5db antennas how much does that cover normally? What is the signal strength of beetel 450bx1 antenna?