telnet for huawei or tp-link router

ernest_hemingway07

Newbie
[OP]
Sep 9, 2011
15
0
any one can give me how to activate dmz for ip 192.168.1.5 on huawei (mt880,mt882, hg520b) or tp-link (TD-W8901G ) by telnet cli
please contact me on halim_sam1977@hotmail.com
 

essbebe

MODERATOR
Regulars
Aug 20, 2006
9,804
81
In any modem check under NAT DMZ option. and enter your Computer's IP.Telnet commands usually access the Modem first.Are you trying to activate these units remotely ONLINE ?Give details. Mention Operating System in use. Windows 7/vista/XPsp3/LINUX etc. Usually email address is not given in forum/s to avoid spam.Please 'EDIT" your post and delete it.You can use the PM ( private message) facility available in forum.
 

essbebe

MODERATOR
Regulars
Aug 20, 2006
9,804
81
i know how do it by html or web configuration but i need it by telnet cli


Scanned Manual approx 1000 pages but could not find any ref to DMZ.
Please give the details of setup either by html or web configuration ,

Other members/users can give an idea/suggestion to help you to set
telnet cli mode to enable DMZ in modem.
 


ernest_hemingway07

Newbie
[OP]
Sep 9, 2011
15
0
for exemple on tp-link TD-W8901G you go to advanced --> nat --> dmz --> and set the ip for exemple 192.168.1.50 i want do this configuration by telnet clianny one have an idea ?
 

essbebe

MODERATOR
Regulars
Aug 20, 2006
9,804
81
http://img528.imageshack.us/img528/9519/picture1vkf.jpg
select Nat select dmz.

http://img151.imageshack.us/img151/5044/picture2csa.jpg

Picture courtesy : @superprash2003.