Hi,I came across this forum and resolved my vonage connection issue with BSNL broadband, but unable to get the internet connection working from vonage adapter to my computer. Here is my setup. BSNL modem (NOT wireless) DNA-A201BE-1 Yellow to ------> Vonage Blue Vonage Yellow to Computer (Windows XP)Originally, my vonage connection did not work. After following this forum, i figured out the issue as follows.BSNL folks made me to use '1483 Bridging' as the ATM protocol and created a new default connection with userid and password on my computer. I needed to connect using that connection. Internet worked fine directly going from BSNL modem to computer, but connecting to Vonage adapter directly from BSNL model did not work. I finally changed the ATM protocol to PPPoE and entered userId/password there itself and my vonage connection started working. Now, i need to connect from vonage adapter to my computer to get the internet working. Please note that connecting to my computer directly from BSNL model works fine even after this change without even going through the default connection created by BSNL folks. what am i missing? Any pointers to get this setup working will greatly help. Few more data points ..1. BSNL folks made me to change Internet Protocol(TCP/IP) properties under LAN connection to enter default ip, subnet mask, default gateway, preferred DNS and alternate DNS server. This LAN connection shows as connected before and even after my updates and shows the device name as 'Broadcom NetXtreme 57XX Gigabit Controller'.2. I also tried setting BSNL broadband connection as not as default. 3. I checked the BSNL modem LAN settings and it has DHCP enabled with the range as 192.168.1.2 to 192.168.1.264