Wireless Without Autodialing--MT841

  • Thread starter Thread starter captnick23
  • Start date Start date
  • Replies Replies 2
  • Views Views 1,437
C

captnick23

Newbie
Messages
5
Location
NA
ISP
BSNL Dataone
Hi, I have a laptop with wifi and a PC without wifi but i use lan in pc. I have 2 dataone accounts one home 250 and other home 750. According to the some topic i read somewhere i config. wireless n autodial for mt841 coz of which i had to put my id in the PVC settin and i typed my home 250 id n password in that and started using wireless on ma laptop. now at the same time i connected the lan wire in ma pc. but its not workin coz my id is not multi user. n i m not even able to dial in my pc coz it gets connected there automatically n my wireless gets dissconnected in my laptop. How can i use wireless by dialing in my laptop and at the same time how can i use my pc with lan wire using my other id. thanx
 
An English description or translation of your problems will not hurt your cause.
 
1.Modem Mt 841. with wireless card.
http://i40.tinypic.com/xqi4hx.jpg (wireless card not shown )
Glad to note that your wireless connection is/was working.

2.Telephone Number say 2xxxxxxx Only one ?
two tariff plans Home 250 and Home 750.
confirm ONLY SINGLE telephone connection.

3.Post Ipconfig/all data

Start RUN type cmd type ipconfig/all

4. Use Dialer mode and Home 250 UserID/PW and connect.
follow settings as given in this link for desktop and laptop

SmartAX MT-841 (Type-IV) ADSL MODEM MULTIUSER CONFIGURATION
Confirm both get connected to Internet.

5. Now disconnect and try Home 750 UserId and password and connect.
same as 4 above.

6.
Start NETWORK LAN Properties
Select TCP/IP
Properties
Select Obtain IP address automatically.
Apply and Save.

Para two : With a SINGLE modem/router you cannot connect
to same ISP VPI/VCI 0 and 35 for two different accounts.
Possible if the ISP is different.


Para Three : If Telephone number is different, same modem
change the RJ11 cable from Phone Port A or B to modem.

Give feedback quoting only relevant portions in my reply.
[ quote ] blah blah [/ quote ] without space will appear as
blah blah


REFERENCE:
http://www.mp.bsnl.co.in/bb/mt841/mt841.htm
 

Top