Well for the newbies and the other alike, I would like to put down the default configuratins for all to see or refer in case of goofups et al.
And no matter wat u do while playing around with your first DSL new router.. be sure to get it back online ..... the reason I do so is that there seems to be no clear post talking basic configuration for ppl in distress.... as it happened with me on Day 1 of getting the connection and wasting nearly 2 hrs in trying to get it back online.
Default Configurations for MTNL Broadband Delhi.
Under Home > WAN
ATM VC Settings
--------------------
PVC - Pvc0
VPI - 0
VCI - 32
Virtual Circuit - En
Wan Settings - PPoE/PPPoA
PPoE/PPPoA
--------------
Username - yr telephone number
Password - CA number unless changed
MTU - 1400
MRU - 1492
Default Route - En
NAT - En
Firewall - En
IP Control - Dynamic
Static IP - none
ATM
----
Service Category - UBR
PCR - none
SCR - none
Other suggestions/recomd :-
#1 Please always change yr DSL Web console pwd (Default U/P - admin/admin) (Tools>Admin)
#2 Also change the default login password (Default pwd assigned is your CA no.)
#3 Always make a back of the config for easy restoration (Tools>System)
#4 Also Remember : Resetting to Factory Defaults isn't that dangerous as projected, on the contrary, its a saviour in cases of screwups. (Tools>System)
#5 Always keep all options of Firewall enabled on the DSL router (Advance>Firewall)
#6 Always prefer connect via the ethernet network port rather than USB, as the latter connection is extremely buggy and unreliable
---Keep in safe place for records----
[UPDATE would keep happening]
Last Update 2k50827
And no matter wat u do while playing around with your first DSL new router.. be sure to get it back online ..... the reason I do so is that there seems to be no clear post talking basic configuration for ppl in distress.... as it happened with me on Day 1 of getting the connection and wasting nearly 2 hrs in trying to get it back online.
Default Configurations for MTNL Broadband Delhi.
Under Home > WAN
ATM VC Settings
--------------------
PVC - Pvc0
VPI - 0
VCI - 32
Virtual Circuit - En
Wan Settings - PPoE/PPPoA
PPoE/PPPoA
--------------
Username - yr telephone number
Password - CA number unless changed
MTU - 1400
MRU - 1492
Default Route - En
NAT - En
Firewall - En
IP Control - Dynamic
Static IP - none
ATM
----
Service Category - UBR
PCR - none
SCR - none
Other suggestions/recomd :-
#1 Please always change yr DSL Web console pwd (Default U/P - admin/admin) (Tools>Admin)
#2 Also change the default login password (Default pwd assigned is your CA no.)
#3 Always make a back of the config for easy restoration (Tools>System)
#4 Also Remember : Resetting to Factory Defaults isn't that dangerous as projected, on the contrary, its a saviour in cases of screwups. (Tools>System)
#5 Always keep all options of Firewall enabled on the DSL router (Advance>Firewall)
#6 Always prefer connect via the ethernet network port rather than USB, as the latter connection is extremely buggy and unreliable
---Keep in safe place for records----
[UPDATE would keep happening]
Last Update 2k50827