Not able to use Voice on BSNL FTTH <Syrotech>

Nikhil Sharma

BSNL FTTH User
[OP]
Regulars
Oct 23, 2015
1,079
158
Gadarwara
Hi,

I’m not able to use voice on my syrotech ONT. When I call on my number it says the number is out of order.

I’m in touch with the guy who takes care of OLT (Tejas OLT). I can’t get to ping the number. The only problem I can think of is it’s because of the ‘out of order’ thing. Is anyone familiar with OLT configuration?
 

varkey

Newbie
Regulars
Jun 11, 2006
313
81
@Nikhil Sharma Could you please post the screenshot of the VOIP configuration page?

The out of order message comes when the number is not registered to the SIP server, so it appears to me that your VOIP/SIP configuration on the ONT is incorrect.
 

Nikhil Sharma

BSNL FTTH User
[OP]
Regulars
Oct 23, 2015
1,079
158
Gadarwara
I had to ask the guy to delete the VOIP profile from OLT’s end though because I had to manually connect my internet by going to WAN connection and hit apply every time I tried to restart the connection.
 

varkey

Newbie
Regulars
Jun 11, 2006
313
81
Are you sure the details are correct? Cause for me, my VOIP WAN interface static IP address is from that same 10.105.x.x IP range. Please share the details you use to configure the VOIP WAN interface. (Obviously mask out the specific IP etc, just the range and config options would do)

My guess is that your SIP server IP address is incorrect as you are using the same IP address of your VOIP WAN interface for SIP proxy and everything.
 

Nikhil Sharma

BSNL FTTH User
[OP]
Regulars
Oct 23, 2015
1,079
158
Gadarwara
Voice IP: 10.105.31.XXX
IP range: 10.105.31.XXX to XXX
MASK: 255.255.254.0
Gateway: 10.105.30.X

DNS1: 192.168.149.78
DNS2: 192.168.149.78
 


varkey

Newbie
Regulars
Jun 11, 2006
313
81
Ah there you go, so your SIP server IP address is 192.168.149.78 (this is same for me as well), so all the IP addresses in the screenshot you posted above should use 192.168.149.78 and not your VOIP WAN IP address.
 

Nikhil Sharma

BSNL FTTH User
[OP]
Regulars
Oct 23, 2015
1,079
158
Gadarwara
Thanks. I tried doing the same though except the QOS thing.

Another thing is my ONT was catching the profile which ONT made. And it was taking IP like 192.168.1.68 and I could not edit the connection as well since it was pre made.