Hello,
If any of you remember, I had problems when I bought a Linksys modem for using broadband and IPTV, but then it did not work out as the bridging option was not in that modem.
This time I took the modem from BSNL itself. The modem they provided was UTstarcom WA3002G4.
However, now I notice that both IPTV and broadband are not functioning together. When I switch on the IPTV, as soon as the picture starts on tv , the net gets disconnected. If not on, the net functions fine..
Can anyone help me with the settings at the earliest please.
trying to give you some details of the settings at present:
Device Info
BoardID:96338WSoftware Version:1132_061507-3.08L.BSNL_02.Bootloader (CFE) Version:1.0.37-8.7Firmware Version:WA3002G4-0021.01Hardware Version:WA3002G4 1.0Model Name:WA3002G4Wireless Driver Version:3.131.35.6.cpe2.0a.s
This information reflects the current status of your DSL connection.
Line Rate - Upstream (Kbps):640Line Rate - Downstream (Kbps):6144LAN IP Address:192.168.1.1MAC Address:00-1b-57-fd-65-f1Default Gateway:59.92.160.1Primary DNS Server:218.248.240.208Secondary DNS Server:218.248.240.135
WAN Info
VPI/VCICon. IDCategoryServiceInterfaceProtocolIgmpQoSStateStatusIP Address
0/351UBRDataoneppp_0_35_1PPPoEDisabledDisabledEnabledUp59.92.185.20
0/321UBRbr_0_32nas_0_32BridgeN/ADisabledEnabledUp
8/351UBRbr_8_35nas_8_35BridgeN/ADisabledEnabledUp
8/811UBRbr_8_81nas_8_81BridgeN/ADisabledEnabledUp
0/1001UBRIPTVnas_0_100.0BridgeN/ADisabledEnabledUnknown
14/341UBRbr_14_34nas_14_34BridgeN/ADisabledEnabledUp
1/411UBRbr_1_41nas_1_41BridgeN/ADisabledEnabledUp
Enable DHCP Server Relay DHCP Server IP Address:
Configure the second IP Address and Subnet Mask for LAN interface
=============================
the above mentioned is when iptv is off and net is on function
anyone here using the same modem?
Basically, I use wireless for internet and a ethernet cable for IPTV.
The modem has four ports and one wireless.
If any of you remember, I had problems when I bought a Linksys modem for using broadband and IPTV, but then it did not work out as the bridging option was not in that modem.
This time I took the modem from BSNL itself. The modem they provided was UTstarcom WA3002G4.
However, now I notice that both IPTV and broadband are not functioning together. When I switch on the IPTV, as soon as the picture starts on tv , the net gets disconnected. If not on, the net functions fine..
Can anyone help me with the settings at the earliest please.
trying to give you some details of the settings at present:
Device Info
BoardID:96338WSoftware Version:1132_061507-3.08L.BSNL_02.Bootloader (CFE) Version:1.0.37-8.7Firmware Version:WA3002G4-0021.01Hardware Version:WA3002G4 1.0Model Name:WA3002G4Wireless Driver Version:3.131.35.6.cpe2.0a.s
This information reflects the current status of your DSL connection.
Line Rate - Upstream (Kbps):640Line Rate - Downstream (Kbps):6144LAN IP Address:192.168.1.1MAC Address:00-1b-57-fd-65-f1Default Gateway:59.92.160.1Primary DNS Server:218.248.240.208Secondary DNS Server:218.248.240.135
WAN Info
VPI/VCICon. IDCategoryServiceInterfaceProtocolIgmpQoSStateStatusIP Address
0/351UBRDataoneppp_0_35_1PPPoEDisabledDisabledEnabledUp59.92.185.20
0/321UBRbr_0_32nas_0_32BridgeN/ADisabledEnabledUp
8/351UBRbr_8_35nas_8_35BridgeN/ADisabledEnabledUp
8/811UBRbr_8_81nas_8_81BridgeN/ADisabledEnabledUp
0/1001UBRIPTVnas_0_100.0BridgeN/ADisabledEnabledUnknown
14/341UBRbr_14_34nas_14_34BridgeN/ADisabledEnabledUp
1/411UBRbr_1_41nas_1_41BridgeN/ADisabledEnabledUp
Enable DHCP Server Relay DHCP Server IP Address:
Configure the second IP Address and Subnet Mask for LAN interface
=============================
the above mentioned is when iptv is off and net is on function
anyone here using the same modem?
Basically, I use wireless for internet and a ethernet cable for IPTV.
The modem has four ports and one wireless.