Want to connect D-Link router to BSNL ftth

Need settings for PPPOE for D-Link DSL 2750u

This modem is a ADSL modem. You need to connect this modem to ONT provide by BSNL FTTH. Then follow the link to use it a WI-FI router.
Source

If this doesn't work, buy a wifi router (without ADSL) and connect it to ONT.

I connected ont Huawei hg850a after this I connected DSL 2750

Where can I feed username and password. Person from BSNL saying feed in D-Link router

I want PPPOE settings

Please help

lucky.ans88 said:

I want PPPOE settings

Click to expand...

Are you able to connect to internet with just the ONT?
If you have internet working with ONT then you can configure D-Link on LAN and use it as wifi AP on same network.
For PPPOE setting you need to login to ONT and check settings there.

Yes I am able to connect internet with just ont . But port forwarding features not available in ont that why D-Link setup is required

ok, So i have the exact same setup. First you need to make your D-Link router to work with WAN. You won't be able to put pppoe settings in the D-Link router since hg850a cannot be used in bridge mode. So after following all the steps in the link provided above , follow the following steps.

1) Connect LAN wire from HG850a(LAN 1) to dlink(LAN 4)

2) Then access the Dlink admin page via a laptop/desktop over lan.

3)Go to this page and change all the values and make them as shown in the picture.
This is to make sure that your dlink's admin page remains accessible on 192.168.100.254 after enabling bridge mode on dlink





4) Go to internet setup in dlink admin page, click on Ethernet then click add.



5)Select protocol as bridging and click apply.



So now your network setup should be
Fiber-> ONT -> Dlink[LAN4](bridge mode) -> all other devices.
for portforwarding, you need to download an app on your android phone
https://play.google.com/store/apps/details?id=org.ehacker.nat_pmp
Then connect your phone via wifi , it you followed all steps correctly then it should be assigned IP via the ONT since dlink is only in bridge mode.
open the app -> Click on plus sign on top right corner-> enter some random name -> enter the public and private port -> enter the IP address of the system from which you are hosting something which requires port forwarding(probably the IP address of your laptop/desktop/gaming console.) it should be 192.168.100.xxx -> select TCP and click add port forwarding.

sadly hg850a does not support bridge mode as per my knowledge that is why we can't use D-Link's admin panel to forward ports. hence you need that app to enable portforwarding via UpNp on hg850a.
hg850a does support portforwarding but they did not give us the interface to manage ports. also make sure that UpNp is ticked in hg850a's admin panel.

They told me to put PPPOE settings in D-Link it will work. D-Link will have control to port forwarding

ask them if hg850a supports bridge mode or not.

They don't have any idea

I know that , 😛 So follow these steps. This works for me, and it should work for you.

My ont IP is 202.157.86.1 and router is 202.157.76.2
Is it ok?