HiI need to work offline often. The modem had been set to dial-up initially. When the bsnl chap came to address a complaint, he set it to the auto connect mode. I need help on disabling the auto connect and return it to the dialer mode. Any help would be appreciated.Thanks
your modem has a reset hole . power on modem .
use a safety pin to press a switch in the reset hole
for about 10 seconds . your modem resets to its
default settings .
Now make a new internet dialer if you are using
win XP . if you use other OS then use raspppoe
dialer ( see raspppoe web site ) .
no don't reset it.. just login to ur modem by typing 192.168.0.1 in ur browser and then enter ur username and password.. this is likely to be admin and admin if u havent changed or else consult ur manual.. then click on wan and then change the dial up type to bridge llc and then create a connection in windows.. search around these forums for "bridge mode" and u should find plenty of information...
Hi,I recently got DataOne installed at my place. I managed to disable the auto connect mode of the modem after reading through this forum. But I have a query. Can I keep the modem always connected to the phone line? How much bandwidth will it cost? Currently I remove the phone line from the splitter when I don't require the net connection. Last night I had scheduled auto downloads in the night unlimited time but it cost me quite a lot bandwidth by 2 o clock. But last night my modem was set in auto dial mode. What is the difference in bandwidth used between these two modes (auto dial v/s manual connection) when the modem is idle.Thanks in advance.
Thanks for the quick reply. Yeah, normally I keep the modem powered off. But if I schedule my downloads in the night by dialing the modem at around 2:15, I'll have to keep the modem on before I go to sleep. I hope it won't eat up too much of bandwidth during that time. I'll try it out tonight and post it here.Thanks man