Login problems with EasySify 2?

If you are upgrading from ES1 to ES2, you may want to do the following,if you have login problems.Option A 1) Enable Force Mac option in ES2. Leave it blank or enter "00-00-00-00-00-00". If that doesnt work, then try the following OPTION B a) Goto command prompt using "cmd" in run dialog. B) type "ipconfig /all" c) Copy the physical address parameter. d) Enable force mac in ES2. e) Insert the copied physicaal address parameter in the mac option text box.

Originally posted by Bhaskar@Mar 19 2005, 12:03 PM
If you are upgrading from ES1 to ES2, you may want to do the following,
if you have login problems.
Option A

1) Enable Force Mac option in ES2. Leave it blank or enter
"00-00-00-00-00-00".

If that doesnt work, then try the following

OPTION B
a) Goto command prompt using "cmd" in run dialog.
B) type "ipconfig /all"
c) Copy the physical address parameter.
d) Enable force mac in ES2.
e) Insert the copied physicaal address parameter in the mac option text box.
[snapback]6886[/snapback]

Click to expand...

[/quote]

no luck i have tried both ways but no use

can you post your messages.dump file?

Hi Bhaskar!This is Rahul Sarin. I had emailed you regarding this problem sometime back.This solution works!!! I can run EasySify 2 now. It runs even if a leave the field blank or put 00-00-00-00-00-00.Please find a permanent solution to this also. Thanks!!!

Originally posted by uthfull@Mar 20 2005, 03:00 PM
Hi Bhaskar!
This is Rahul Sarin. I had emailed you regarding this problem sometime back.

This solution works!!! I can run EasySify 2 now. It runs even if a leave the field blank or put 00-00-00-00-00-00.

Please find a permanent solution to this also. Thanks!!!
[snapback]6922[/snapback]

Click to expand...

[/quote]

Thanks Bhaskarji

It works and thank u very much to ur promplty help regarding this issue.

Originally posted by uthfull@Mar 20 2005, 03:00 PM
Hi Bhaskar!
This is Rahul Sarin. I had emailed you regarding this problem sometime back.

This solution works!!! I can run EasySify 2 now. It runs even if a leave the field blank or put 00-00-00-00-00-00.

Please find a permanent solution to this also. Thanks!!!
[snapback]6922[/snapback]

Click to expand...

[/quote]


There is a permanent solution. Ask Sify to reset your mac settings. Just tell them you changed your network card and are unable to login or something like that.

Otherwise, if its working fine, then just let it be.


I found out why ES2 is having trouble loging in. Its because ES2 retrieves mac address without hex padding, i.e if you mac is actually 9C-39-02-.... ES2 retrieves it as 9C-39-2-... Notice that the Zero is missing. Thats is what is causing problems. I will fix this in the next release.

Eagerly waiting for the next release then......!!!

Thanks for the solution Bhaskar 🙂. It works for me too now and I have shifted from EasySify 1 to EasySify 2.

excellent

Hi Bhaskar ..I am sorry to be replying after such a long time now...The problem is I am still unable to use easysify2 ...After reading this thread .... this is what i did..1}Put the SAM and PORT settings u mentioned on your website..2}Put 00-00-00-00-00-00 as force mac to..3}Put my Username and p@$$ After doing this I was able to login and surf....but that was 2 days back..Since then i am unable to use easysify2 ...gives error like Socket Creation error and sometimes Hangs on the message Authenticating user with Sify... Also easysify1 never causes any probs ....plese help

post messages.dump file please

gauravtyagi, have you tried filling in your actual mac address in the force mac address box, gotten from running ipconfig in a command prompt or winipcfg from start>run?

my problem is little strange.
wehn i run easy sify 2 it doesnt connect witht the sam server for the 1st time. all it says is connection failed but when i tell it to connect again then it does :blink:
EasySify v1.1 Start Up Complete.
11:15:24 PM: Not Connected to Sify.
11:15:26 PM: Getting Session Id.
11:15:26 PM: Attempting to connected to 202.144.65.70
11:15:47 PM: Connection failed to Sify.
11:15:49 PM: Getting Session Id.
11:15:49 PM: Attempting to connected to 202.144.65.70
11:15:49 PM: Authenticating User with Sify.
11:15:49 PM: Attempting to connected to 210.18.2.19
11:16:10 PM: Connection failed to Sify.
11:17:30 PM: Getting Session Id.
11:17:30 PM: Attempting to connected to 202.144.65.70
11:17:30 PM: Authenticating User with Sify.
11:17:30 PM: Attempting to connected to 210.18.2.19
11:17:30 PM: Logged In.
11:17:30 PM: Checking for updates
11:17:31 PM: Update(1) Available.
11:17:31 PM: User has chosen to ignore update.
11:17:31 PM: Changing status to previous.
11:17:31 PM: Logged In.
[/b]

SAM server is busy/loaded. This should not happen all the time though.

i ahev tried the various mac tricks like forcing it to blank, 00-00..., and to my actual mac addy too but it still doesnt login. im not able to upload message.dump coz the forum site says "Upload failed. You are not permitted to upload a file with that file extension." so im attaching a screenshot.my bband.ini in sify client folder is as follows:[Urls]RemoteUpgrade=http://210.210.4.73:81/bbandnew/chkremupgrade.php3Connectivity=http://myaccount.way2talk.com/voip/remote.php3Loggingurl=http://chn.sifybroadband.com/test/uploadlogfile.php3[SAM]IP=210.210.4.73[HBS]ServerIP=210.210.4.73Port=6776Frequency=5Flag=N[Version]SoftwareVersion=2.1[SSG IP]Bangalore SSG=[Mail]MailPage=http://mail.sify.com/getmails.php3View attachment 113View attachment 113