Hi,Help me with the steps to Setup Belkin N300 router with Tikona wifi.I tried the Dynamic mode method, but didn't work.The modem is at the terrace. the wire from roof top goes to poe adapter. then a cable for lan i inserted in the wan port of belkin.
i am having Belkin basic N150 router.i would suggest you to "reset factory settings" in your router,then just connect cable from tikona's POE to WAN port (which is usually of yellow or blue coloured) but dont replace POE with router, you must have to use POE for powering NANO/RUCKUS device (which is on your terrace)so, cable will be like this NANO/RUCKUS > POE > Belkin > LAN1 (if you have any PC) .you dont have to select or change any setting in belkin.just use it as it is.if you want, you can change password / SSID of it, but dont change any other settings.as per this setup, you will surely get Green light , then you can connect your lappy / mobile with that wifi, on first time it will automatically redirected to 22.214.171.124 for login. just do login and you are ready to move