Beetel220BXI cannot connect

M

Mughillain Kuppusamy

Newbie
Messages
7
Location
NA
ISP
bsnl
Dear All,
I need your help in solving this problem. I am trying to configure Beetel 220BxI ADSL2 modem with BSNL. The problem is I am not able to connect to http://192.168.1.1 or ping 192.168.1.1 successfully. So I cannot do any configuration. When I ping I get a request times out error. Moreover the PC/USB Led is blinking slowly.

My TCP/IP4 properties maintained is
192.168.1.10
255.255.255.0
192.168.1.1

DNS 208.67.220.220 & 208.67.222.222. I've even tried with 61.0.0.5 & 61.1.96.69. Nothing works.

When I use a Huawei modem (supplied by BSNL), with the same LAN config everything works perfectly.

I also tried resetting the modem by pressing the RST button for about 30 secs

Any valuable input would be of great help.
 
Did you use ID admin PW as password?or try support supportuser password. feedback.
 
The ID PW details were given as usually Beetel220BX is supplied by AIRTEL.
So possible error using ID as admin and PW admin was possible.

Give more details of the Beetel 220BX unit:

Are you sure it was working earlier with any ISP ?

Power adapter used rated 5V amp D.C= at 1 Amp rating ?

Ready/try for Firmware update AT YOUR own RISK
in command.com mode.?
feedback.
 
I think even for Firmware update, I should be able to connect to the modem. This was supplied by Airtel(also the adaptor).
the problem is that i am not able to establish the connection ->
- the pc/usb LED glows on and off like slow blinking.
- pinging 192.168.1.1 returns time out.
- trying 192.168.1.1 in the browser(IE/Chrome) returns Page not found. The userid/pwd popup doesnot come, only then I can think of entering the correct id.

this is happens only for beetel 220Xi, whereas the one supplied by BSNL(Huawei) connects to my machine. So the pc config should be correct? am i right?

I tried to resetting the modem.. pressing the RST for about a 30 sec. I expected the LEDs glowing(power, data) would go off and on (like u see when you reset a wifi router.. note that I am not connecting the modem to the router) but that didn't happen. the LEDs just continued to glow. Is there a proper way to reset the modem?

could it be possible the modem or the adapter is damaged?




--------------------------------------

The ID PW details were given as usually Beetel220BX is supplied by AIRTEL.
So possible error using ID as admin and PW admin was possible.

Give more details of the Beetel 220BX unit:

Are you sure it was working earlier with any ISP ?

Power adapter used rated 5V amp D.C= at 1 Amp rating ?

Ready/try for Firmware update AT YOUR own RISK
in command.com mode.?
feedback.
 
I think even for Firmware update, I should be able to connect to the modem
Check previous post.
Ready/try for Firmware update AT YOUR own RISK
in command.com mode.?
feedback.
access the modem 192.168.1.1/look.html and give FW version and Software version.
( ignore fonts )
 

Could you please let me know how to upgrade the firmware in Command Mode?

I tried to access 192.168.1.1/look.html.. this doesn't come up either.

Thanks for your help.


Check previous post.
Ready/try for Firmware update AT YOUR own RISK
in command.com mode.?
feedback.
access the modem 192.168.1.1/look.html and give FW version and Software version.
( ignore fonts )


----------

I have the same problem as discussed in https://broadband.forum/bsnl-broadband/58727-bsnl-broadband-beetel-220bx-adsl2/ .. could you please help me.
 
link-removed - The leading online storage and file delivery service

Connect the modem in LAN mode

download the file and RUN .
command.com page will open
enter 192.168.1.1. ID admin PW password ( or admin )
If Ok FW will be flashed. ( should take less than 5 minutes )
)
If any problem your modem can become useless.
Check web sites work after settings made.
Para two
If not satisfied try latest from Airtel web site
122.166.105.80 - /Firmwares/Beetel 220BX/

Check Parent Directory for your model 110BXI/220BX/220BXI


for reference :
192.168.1.1
One model:Board ID: 96338L-2M-16M
Software Version ID: V8.11.01.01
Firmware Version: 3.06L.05.A2pB021g.d19d ( OLD VERSION ) Check yours now.
Bootloader (CFE) Version: 1.0.37-6.8
192.168.1.1/look.html
???? V8.11.01.01
???? 3.06L.05.A2pB021g.d19d ( *software version _)
CFE ?? 1.0.37-6.8
IP ?? 192.168.1.1
MAC ?? 00-1E-40-3C-BF-05
???? T2Q-0Q-001 ( * Firmware file )
???? 2006-11-17
???? (Kbps) 573
???? (Kbps) 2557
 
well nothing comes out..check the result..Firmware updation Process May Take 5 minutes time.Wait for the Modem to rebootftp> open 192.168.1.1ftp> admininvalid command.ftp> passwordinvalid command.ftp> hashHash mark printing On ftp: .ftp> put T28-0q-003.imgNot connected.ftp> byeUpdating Modem's ROM...Please wait while the Modem reboots.........Nothing has happened. I guess the bad news just became true.So I now have two useless modems Beetel 220BXi and UStarCOM ut300r2u.Atleast could you please pass me the available firmware of UStarCOM.Board ID: 96338L-2M-8MSoftware Version: 3.08.02.UB.01.14_1357_100807Bootloader (CFE) Version: 1.0.37-10.1Firmware Version: UT300R2U.0011.01Hardware Version: UT300R2U 2.2Model Name: UT300R2UI will atleast try reinstalling the firmware for this modem.Thank You,
 
what is the file extension *.exe ?
try typing it in RUN command.
I had mentioned it took about a minute.
About 100KB Insert will be deleted later.


Try Ut300r2u later. same airtel tool ( comments three years back in another forum)
Nat settings virtual server/port triggering options missing/ and or freezing.
User got a new modem from BSNL!!!
WARNING!!!
xxxxxxxxxxxxxxxxx.net/bsnl-broadband/11328-modem-firmware-upgrade.html

11-13-08
@essbebe
plzzz remove this link for upgrading ut300r2u...i tried and lost my modem...i knew jto in our exchange so i was able to replace my modem...after update my modem was unable to recieve any data,also power light was off and dsl light was permanently on[even without inserting cable]...so plzzz remove this link so that others wont try n its not very easy to deal with bsnl guys[if u dnt know any person there] to replace ur modem at once..i think u know that how much time they waste.modem cost is 1800rs so they will not replace it at their own risk.thanxxxxx anyway as i got new modem
 
Dear Essbebe, Thanks a lot for your time. Today I bought a new modem TP-Link 8816 and the connection works like gem. Will have to find a new way to use the old ex-modems.thank you very much for your time.
 

Top