Help Rebooting VMC AN1020-21

Hi guys,First time poster here, but I read a lot of stuff in here. Solved a lot of problems by reading tutorials/solutions given here. But today i have a problem that i tried solving with the help of this forum, but couldnt.Problem is I have just bought VMC AN1020-21 wifi modem. I have a BSNL Combo 600 plan (with NU).I am using multiple computers with the modem, so have it in PPPoE mode (no dialer). So to utilize NU i need to reboot the modem at 2o'clock. But the telnet thingy is not working. After SUCESSFULLY logging in with username - "admin" and pass - "admin", when i type "reboot" and press enter, it shows that reboot is not a recognized command.Please help me, also if someone can tell me the whole process of rebooting via scripts, would be awesome.Thanks.

So to utilize NU i need to reboot the modem at 2o'clock......

just switch on the modem at 0700AM and surf normally till 0830AM
Also if possible between say 0130 AM and 0230AM . Surf or keep idle.
Switch off.
Next daY check in your usage portal. Whether Day and NU is split
at 0200AM and 0800 AM.
Appears Bsnl usage meters are splitting the usage correctly now.

schedulers etc later.

Next daY check in your usage portal. Whether Day and NU is split
at 0200AM and 0800 AM.
Appears Bsnl usage meters are splitting the usage correctly now.


Did this a day ago after reading many posts that say BSNL was spliting it, but its not happening for me though. Look at the screen shot.
http://imageshack.us/photo/my-images/714/33168432.jpg/

Appears your selfcare portal is edc
Above entry might have been listed in Night usage separately.
( even for U/L users day and night usage listed separately in selfcare portals.)

In Summary Total confirm this usage added or not .

Only in Data.bsnl.in the readings are continuous.
2.
Test this application in daytime.
Auto-connect Download scheduler « PC-Gyaan

Use the scheduler mentioned in the above post, it will work fine.

Above software didn't work......I scheduled for a reboot, didnt reboot the modem 🙁

----------

ok seems like its working.........didnt work the first time though, wonder why !!

Thanks guys......