-
Amazon Deals - ToS - Warp
Slow speed on BSNL Fiber
- Thread starter Xtinction
- Start date
- Replies 81
- Views 9,402
varkey
I got banned!
There is absolutely no issues with your optical parameters.
1. Signal level is good. Anything greater that -27 dBm is good enough
2. Not authenticated is not an issue, it depends on the operators OLT config.
3. There is no warning, try pulling the optical cable out, then you'd see the actual warning message.
Your actual issues could be due to something else.
1. Signal level is good. Anything greater that -27 dBm is good enough
2. Not authenticated is not an issue, it depends on the operators OLT config.
3. There is no warning, try pulling the optical cable out, then you'd see the actual warning message.
Your actual issues could be due to something else.
@Xtinction try Check your Internet Speed see what speed you are getting.
Try downloading something, speedtests can be deceiving.
Are you seeing low speeds on wifi or lan?
Also try changing your MTU, this actually fixed a lot of issues for people here. https://kb.netgear.com/19863/Ping-Test-to-determine-Optimal-MTU-Size-on-Router
©2020 sloj 😉
Last edited:
both and i already checked and my mtu was optimal
Vultr - Looking Glass Can you try downloading the 100MB file from here, see what speeds you get.
If you're facing low speeds on wifi, you'll have to buy a router. Some Netlink (the kind in your screenshot, they're sold in different names) ont have really slow wifi. Mine can only give me 16-20mbps. Using an old D-Link ADSL modem as AP gave me 50mbps. LAN is fine.
If you're facing low speeds on wifi, you'll have to buy a router. Some Netlink (the kind in your screenshot, they're sold in different names) ont have really slow wifi. Mine can only give me 16-20mbps. Using an old D-Link ADSL modem as AP gave me 50mbps. LAN is fine.
