Due to less network load, BSNL is slaying right now.

  • Thread starter Thread starter f3rmion
  • Start date Start date
  • Replies Replies 174
  • Views Views 16,662
@Kick933 just spoke to the LCO and he advised the RX power should be between -30 and -25.
Tell him you spoke to BSNL person and this is causing speed issue.Be firm.Else,he will continue his irresponsible behaviour
 
(Below this your upload speed might wither due to LCO distance) -24 < Rx <-3 (above this might lead to ont config problems)
Also take account for LCO distance from your house(where your lco hosts his OLT), prefer your lco distance no more than 3-4 km, don't fall for standards that you might have 20 km coverage with PON tech, most lcos don'y invest much/competent enough to run their PON infra over large distance as per my lco
 
My connection in Pune dropped today from 330pm for an hour (fiber link up but no pppoe connection) and upon returning it seems it has become stable now. Although my speeds still seem to be capped at 80 mbps down and 50 mbps up.
 
It's showing "Warning: EPON LOS" (loss of signal)
 


@vishalrao Everything seems to be working fine. It just shows it that way on mine (Digisol) too probably because when the device starts there is no signal for a few seconds. Also he didn't mention anything other than just posting a pic.
 

Top