Ont configuration bsnl ftth

Som banerjee

New Member
Messages
1
Ont : Nokia sisters make
I had my bsnl Ftth connection activated a few days back. I am able to access internet through dial up through my laptop which i have connected to the ont modem through a lan wire.
Furthermore i discovered that out of 4 internet ports only one port has internet connectivity.
For two of the ports i am able to access modem config page at 192.168.1.251, but i am unable to access the ont webpage through the ethernet port which has internet connectivity. I was planning to use my old adsl router as an access point,but due to this issue i am unable to do that.
Please gelp
 
Messages
298
Location
Kolkata
He might be able to. I had a DLink ADSL modem cum router, but I could use that as a router for BSNL FTTH.
 


VivekA

Member
Messages
109
@Crazyguy030601 connecting the ONT to the ADSL router's lan port will make the router work as a switch. So only one device can access the Internet at a time.

Also, if you describe your setup in detail, I can try to understand.
 

VivekA

Member
Messages
109
@Som banerjee , 2 things:

1. If you want wifi for multiple devices, you will need an ethernet router. The ADSL router can only route through the ADSL port which is not usable for connecting to the ONT.

2. Since you can access internet through your laptop, it means your laptop's mac address is authenticated with bsnl. You will need to clone this address after setting up a router. Alternatively, you'll need to call the LCO to get the registered mac address changed to that of your router.
 


Messages
298
Location
Kolkata
@VivekA It was around 2 years back, so I don't exactly remember. But I do remember that I had connected the modem to WAN port 2 on the Dlink modem and set it on bridged mode.I think.
 

VivekA

Member
Messages
109
Yeah, if its a modem-router device, you could bridge the ONT to it and use its wifi capabilities.
 

Similar threads


Top